562815
74
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
68
Video output is red
On an HD2000, if the video is configured for component / HDMI out and the HD2000 is
connected to a VGA monitor, the video output displays in red. Since the video output defaults to
component/HDMI out, you must set the video mode to 1024x768 when using a VGA monitor.
For playlists (AUTOPLAY.BSP) and interactive playlists (AUTOPLAY.CSV), add the following line:
VIDEOMODE 1024x768x60p
No audio during playback
The Autoplay script defaults to the Audio 1 output. This is the default output for your playlist,
interactive playlist, and AUTOPLAY.MPG files.
1 Make sure your audio cable is firmly connected to the Audio 1 output on your BrightSign.
2 Check the volume on your powered speakers / AV receiver.
3 Make sure the AV receiver is set to the correct input.
4 If you set the volume or audio output in your playlist, double-check the settings you used.
For audio output, 0=Analog, 1=USB, and 2=Optical/HDMI.
5 If youre using a custom script (including a modified AUTORUN.BAS), make sure the audio
output mode matches the outputs youre using on the back of your BrightSign. See the
roAudioPlayer” and “roVideoPlayer” sections in the BrightSign Object Reference for details.
Playlists do not play properly
Download the latest Autoplay script from
www.brightsign.biz/support
. Playlist support
requires AUTORUN.BAS v1.1 or later.
1 Make sure AUTOPLAY.BSP is spelled correctly.
2 Make sure that AUTORUN.BAS and AUTOPLAY.BSP are both in the root of the CF/SD card.
NOTE:
HD2000 1.3 software requires AUTORUN.BAS v1.3x or later, and HD2000 2.x software
requires AUTORUN.BAS v2.x or later.
74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BrightSign HD600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info