562815
92
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
86
To begin testing your custom script:
1 Copy your content and script file to the CF/SD card.
2 Name your script RUN.BAS. You can call it anything, as long as it’s not AUTORUN.BAS, so it
doesn’t start automatically.
3 Add debug = true as the first line of your script. This command enables you to see output
from the print statements you added to your script.
4 Insert your CF/SD card into your BrightSign and add power.
5 When the Roku prompt appears, type the following:
script run.bas
Multi-run script limitations
Currently when a script terminates, BrightSign does not free resources allocated by Roku Objects.
This means that if you use the
script
shell command to run a script, and the script exits, you may
not be able to run it again successfully unless you reboot your BrightSign between script tests.
Linux shell (HD2000 only)
The HD2000 has a Linux shell that you can access via the serial port. To access the Linux shell,
enter the following at the Roku prompt:
exit
When you are done using the Linux shell, enter the following at the Linux prompt:
reboot
92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BrightSign HD600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info