562815
93
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
87
Updating BrightSign software from the BrightSign Shell
BrightSign is pre-programmed with two primary software images: a
safe mode
and a
run mode
.
The safe mode software image is write-protected, and you cannot change it once programmed
by the factory. The main purpose of safe mode is to validate that the run mode ROM image is not
corrupt and to boot your BrightSign. In addition, safe mode can upgrade or re-program the run
mode ROM image.
The run mode software image is stored on a flash ROM and you can upgrade this software in the
field. The update process is very safe (see
Step 2: Get the latest BrightSign software
for details
updating the run mode software). If for some reason the update fails, for example if there is a
power failure in the middle of the update, BrightSign boots in safe-mode and completes the
update. BrightSign is always working on improving the BrightSign software, so check the
BrightSign web site periodically for upgrades.
BrightSign works with most CF/SD cards, but is not compatible with all cards. Because the
BrightSign safe mode software is normally older than the run mode software, more CF/SD cards
are compatible with run mode than with safe mode. Therefore, BrightSign may not detect the
UPDATE.ROK file on some CF/SD cards. It is impossible to tell by a CF/SD card’s name, brand, or
description if it is compatible. You must try it. (For details on testing your CF/SD cards and
accessing the shell, see
Testing CF cards
and
Accessing the BrightSign shell
.)
To manually update using the BrightSign shell:
1 Copy the UPDATE.ROK file onto your CF/SD card.
2 Insert the CF/SD card in your BrightSign and apply power.
3 When the Roku > prompt appears in the BrightSign shell, type the following:
update update.rok
NOTE:
We are continuing to add support for more CF/SD cards.
93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BrightSign HD600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info