Bedienungsanleitung Brita PURITY 450 Steam (Seite 24 von 142) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

497161

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

• The pressure vessel and the pressure vessel lid of the ﬁ lter systems have a service life of up

to ten years (from the date of installation), provided that they are installed and used correctly

and the operating conditions outlined in the Technical Data chapter are adhered to. They must

always be replaced after a maximum of ten years. The hoses must be replaced in rotation after

a maximum of ﬁ ve years.

• Production date:

Production code sticker ﬁ lter cartridge and box, example: B812002010

8 Production year, here: 2008

12 Production week, here: calendar week 12

002 Batch No. of ﬁ lter medium, here the second batch ﬁ lled in terms of quantity

010 Serial number of the ﬁ lter cartridge, here the tenth cartridge from the second batch

Production date of pressure vessel and pressure vessel lid, example: 0308

03 Production month, here: March

08 Production year, here: 2008

3.5 Safety Assembly Instructions

• The terminal device operated with the ﬁ lter must be free of limescale prior to installation.

• Protect the ﬁ lter system from sunlight and mechanical damage. Do not assemble near sources

of heat and open ﬂ ames.

• A stop valve must be installed before the ﬁ lter system intake hose.

• If the water pressure is higher than 6.9 bar or if there are statutory requirements, a pressure

reducer must be installed before the ﬁ lter system.

• A non-return valve tested by the DVGW has been factory-installed at the water intake of the

ﬁ lter head.

• No copper pipes and no galvanised or nickel-plated pipes/connectors may be installed between

the water ﬁ lter and the consumer. The use of BRITA hose sets is recommended here. When

choosing the material for parts that come into contact with water after the BRITA ﬁ lter system

it must be remembered that, due to the process, decarbonised water contains free carbon

dioxide.

• All parts must be installed in accordance with the country-speciﬁ c guidelines on the installation

of drinking water facilities.

• For erection and operation of the ﬁ lter system, the BG rules “Working in Kitchens” of the Spe-

cialist Committee “Foods” of the BGZ (BGR111) must be observed.

4 Installation

Caution: Prior to installation, read the Technical Data (Chapter 12) and the Operating and Safety

Information (Chapter 3). After the product has been stored and transported at temperatures below

0°C, it must be stored with the original packaging open for at least 24 hours at ambient temperature

(Chapter 12) before commissioning.

4.1 Delivery Scope

Prior to installation, remove the entire delivery scope from the packaging and check that everything

is present:

1 x Pressure Vessel

1 x Pressure Vessel Lid

1 x Filter Cartridge

1 x Handbook

1 x Carbonate Hardness Test

1 x Sticker for Service Pass (orange)

1 x Adapter 1"–3/4"

If parts of the delivery scope are missing, please contact your local BRITA ofﬁ ce (see the back of the

cover).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brita PURITY 450 Steam Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info