Bedienungsanleitung BRK HS-4705-400 (Seite 10 von 29) (Englisch)

606847

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Page 18 Page 19

basIc operatIon

recording

basIc operatIon

recording

Recording Schedule (TIMER RECORD) Example

Privacy Mask Field

MASK FIELD lets you block a speciﬁc portion of a channel you do not want

recorded or shown on the display screen. This can be useful if you need to

conceal a sensitive area being captured by the camera. To use the Privacy Mask

Field:

1. From the Record menu, click MASK FIELD. The Mask Field menu opens.

2. Choose a channel you wish to apply the Mask Field.

3. Select ON from the SWITCH drop-down menu.

4. Click SETUP. The Mask menu will be replaced by the full-screen camera view

of the desired channel. Using the mouse, click and drag the cursor over the

area you want to conceal. A single click will produce a small black square.

5. Right-click anywhere on the screen to return to the Mask Field menu.

6. Click APPLY. Click OK in the REMARK window. Click EXIT.

Motion Detect Setup

You can conﬁgure motion detection for each channel (Camera) connected to the

DVR. To conﬁgure motion detection:

1. From the Main Menu click ADVANCED. Then click MD (Motion Detect).

2. Under STATUS, select ON to enable motion detection for the desired chan-

nel.

3. Under SENSITIVITY, select 1 through 4. The higher the number, the more

sensitive the motion detection.

4. Under MD AREA SETUP, click SETUP. The red motion grid appears over the

selected channel in full screen.

5. Click the blocks in the grid to enable/disable motion detection. Red=motion

detection enabled; Clear=motion detection disabled.

6. Right-click anywhere on the screen to return to the Motion Detection menu.

7. Click APPLY. Click SURE in the conﬁrmation window.

8. Click EXIT in all menus until all windows are closed.

NOTE: You can disable the MD buzzer in the Alarm Setup menu.

When MD is triggered, in the Live View Screen you will see a red【M】in the

Channel with a MD warning. You may also see a【R】if you set up the channel

to record when an alarm is triggered.

You want your system to record continuously on all channels from 9 AM to 5 PM Monday to

Friday. You also want Alarm/Motion recording from 5 PM to 9 AM. You do not want the

system to record Saturday or Sunday:

1. Open the Schedule menu.

2. Under CHANNEL, select ALL.

3. Click the blue NO RECORD block be-

low the grid. A checkmark will appear

in the block.

4. Under SUN, click blocks 00~23. The

blocks will turn blue.

5. Under FROM, select SUN. Under TO

select SAT, and then click COPY.

6. Click the red ALARM block below the

grid.

7. Under MON, click blocks 00~08 and

blocks 17~23. The blocks will turn red.

8. Under FROM, select MON. Under

TO select TUE, and then click COPY.

Repeat for Wednesday, Thursday, and Friday. Your completed schedule should the

same as the schedule to the right.

9. Click SAVE. Click CLOSE in the conﬁrmation window. Click EXIT in all menus until all

windows are closed.

Recording Schedule

Motion Detect Menu

Motion Detect Grid

basIc setup

Use the BASIC SETUP menu to conﬁgure language, date and time settings,

password setup, along with display, video and audio settings. You can also exit

the system through this menu. The Basic Setup menu contains the following

sub-menus: Language, Date/Time, Password, Display, Video/Audio and Exit.

recordIng

RECORD Mode

Conﬁgure Recording Options:

You have three recording options: Continuous, Schedule and Motion. By default,

the DVR is set to record continuously. Set parameters as follows:

1. From the Main Menu click RECORD. Under CHANNEL, use the drop-down

menus and select ON/OFF to enable/disable recording from the selected

channel. Note: If CHANNEL is set to OFF, then Motion Detect, Alarm and

Manual Record are also disabled for that channel.

2. Under RESOLUTION, select Highest, High and Normal.

NOTE: NTSC: @30fps, PAL: @25fps. Recording capabilities for both NTSC &

PAL: Channels 1 - 4: D1, HD1, CIF.

3. Under QUALITY, select Best, Fine or Normal. This relates to bitrate in Kbps.

4. AUDIO, select ENABLE or DISABLE. If audio recording is enabled, the system

will record audio from connected audio capable cameras (not included). See

caution statement on audio recording in Video/Audio section.

5. REC. MODE, select POWER UP or TIMER RECORD. If you select POWER UP,

the system will record continuously (Normal Recording) when the system is

powered on. If you select TIMER RECORD, you have to set a recording

schedule on the system.

6. REC. SIZE (Record Size), select 15MIN, 30MIN, 45MIN, or 60MIN.

NOTE: Record Size sets the ﬁle size for recorded video ﬁles on the system.

Instead of recording data as one large ﬁle, the system will divide the data into

blocks of 15, 30, 45, or 60 minutes. This makes the recorded data easier to search

7. MASK FIELD lets you block a speciﬁc portion of a channel you do not want recorded or shown on the display screen. This

can be useful if you need to conceal a sensitive area being captured by the camera. See next section for details.

8. Click APPLY. Click SURE in the REMARK window. Click EXIT.

Recording Schedule (TIMER RECORD)

You can program the DVR to record according to a customized recording

schedule. The Schedule Grid shows the days of the week and hour blocks

00~23. You can set Alarm Recording (Red), General Recording (Green), or Manual

Recording (Blue) to each time block of each day. To set a recording schedule:

1. Open the Main Menu and click RECORD.

2. Under REC. MODE, select TIMER RECORD.

3. Click SCHEDULE. The Schedule menu opens.

4. Under CHANNEL, select speciﬁc channels or select ALL.

5. Below the grid, click either ALARM (red), GENERAL (Green), or MANUAL

RECORD (Blue) and then click a time block on the desired day.

6. Use the FROM/TO drop-down menus to copy the schedule of one day to

another. For example, if you want your schedule for Monday to be the same

on Wednesday: under FROM select MON, under TO select WED, and then click COPY.

7. Click APPLY. Click OK in the REMARK window. Click EXIT.

Record Menu

Recording Schedule

CCTV Resolution

CCTV resolution is measured in vertical and horizontal pixel dimensions and typically

limited by the capabilities of both the camera and the recorder that you are using for

your CCTV surveillance installation. CCTV systems use an analog video signal. For

television speciﬁcations (which CCTV uses) the highest resolution that can be captured

and stored is 704 x 480 (NTSC for the United States) and 720 x 576 (PAL for Europe). This resolution

is known as D1 resolution. A high end CCTV recorder is capable of recording at up to D1 resolution.

CCTV Resolutions

D1: 704 x 480

HD1 (2CIF): 704 x 240

CIF: 352 x 240

QCIF: 176 x 120

Bitrate in Kbps

Image

Quality

Normal Fine Best

Normal (CIF)

384 512 768

High (HD1)

512 768 1024

Highest (D1)

512 768 1024

Basic Setup Menu

BRK HS-4705-400 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info