Bedienungsanleitung Brother Brother Innov-is XJ1 (Seite 189 von 212) (Englisch)

718772

189

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

ERROR MESSAGES

187

Appendix

Below is an explanation of error messages. Refer to these when necessary (if you press or do the operation

correctly while the error message is displayed, the message disappears).

ERROR MESSAGES

Error messages Cause/solution

Attach the embroidery frame. This message is displayed when the machine is ready to embroider pattern,

and the “Start/Stop” button is pushed while the embroidery frame is not

attached.

Cannot change the configuration of the characters. This message is displayed when there are too many characters and the

curved character configuration is impossible.

Cannot embroider since the embroidery unit is not

attached. Turn off the machine, and then attach the

embroidery unit.

This message is displayed when the “Start/Stop” button is pushed and the

machine is in embroidery mode, but the embroidery unit is not attached.

Cannot recognize the data for the selected pattern.

The data may be corrupted.

This message is displayed when there is a possibility that the data for the

selected embroidery pattern is corrupted.

Change to a larger embroidery frame. This message is displayed when the machine is in embroidery mode and the

small frame is attached, and the selected pattern does not fit in the small

frame.

Check and rethread the upper thread. This message is displayed when the upper thread is broken or not threaded

correctly, and the “Start/Stop” button, (reverse stitch button) or

(reinforcement stitch button) is pressed.

Data volume is too large for this pattern. This message is displayed when the stitch patterns you are editing take up

too much memory, or if you are editing too many stitch patterns for the

memory.

Failed to save file. This message appears when you try to save more than 100 settings screen

image files in the USB media. In this case, delete a file from the USB media

or use different USB media.

In twin needle mode, the automatic needle

threading button cannot be used.

This message is displayed when the automatic needle threading button is

pushed while twin needle mode is selected.

Includes a special pattern that cannot be saved to

external memory. Save the pattern in the machine's

memory.

This message is displayed when you try to save a copyright protected

pattern to USB media.

According to copyright laws, patterns that are illegal to reproduce or edit

cannot be saved to USB media. If this message displays, save the pattern in

the machine’s memory.

Lower the buttonhole lever. This message is displayed when the buttonhole lever is up, a buttonhole

stitch is selected, and the “Start/ Stop” button, (reverse stitch button) or

(reinforcement stitch button) is pushed.

Lower the presser foot lever.

This message is displayed when (Presser foot lifter button) is pushed

while the presser foot lever is raised/the needle is lowered.

Make sure embroidery frame is moved as far back

as possible. LOCK DOWN THE FRAME-SECURING

LEVER.

This message is displayed when the embroidery frame is attached.

No more patterns can be added to this

combination.

This message is displayed when you cannot combine patterns.

15 No more stitches can be combined. This message is displayed when you try to combine more than 71 patterns.

Not enough available memory to save the data.

Delete some patterns or use a different media.

This message is displayed when the memory is full and the stitch pattern or

embroidery pattern cannot be saved.

Not enough available memory to save the pattern.

Delete another pattern?

This message is displayed when the memory is full and the stitch pattern or

embroidery pattern cannot be saved.

OK to cancel the current pattern selection?

This message is displayed when, after selecting a pattern, is pressed

and the pattern is about to be deleted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Brother Innov-is XJ1 Seite 189

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Brother Innov-is XJ1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info