Bedienungsanleitung Brother Brother Innov-is XJ1 (Seite 190 von 212) (Englisch)

718772

190

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

ERROR MESSAGES

188

OK to cancel the current stitch selection? This message is displayed when, after selecting a stitch pattern,

, , or is pressed and the stitch pattern is

about to be deleted.

20 OK to delete the selected picture? This message is displayed when the image is deleted.

OK to delete the setting?

This message appears when or is pressed to delete the

settings for a utility stitch. To delete the selected settings, press .

OK to move the embroidery carriage to its previous

position?

This message is displayed when replacing the embroidering bobbin thread.

OK to recall and resume previous memory? This message appears if the machine is turned off while embroidering, then

turned on again. Press to return the machine to the condition (pattern

position and number of stitches) when it was turned off. Follow the

procedure described in “If the Thread Breaks or the Bobbin Runs out of

Thread During Embroidering” on page 138 to align the needle position and

embroider the remainder of the pattern.

OK to revert to previous color changes?

This message is displayed when is pressed when changing thread

colors.

OK to separate the combined border pattern? This message is displayed when rotating a saved combined pattern in the

embroidery screen.

Pattern extends to the outside of embroidery frame. This message is displayed when the machine is in embroidery mode, and the

character pattern combination is too large to fit in the embroidery frame.

Pattern extends to the outside of embroidery frame.

If you plan to add more patterns, rotate the pattern

combination.

This message is displayed when the machine is in embroidery mode and the

combined character pattern is too large for the embroidery frame. You can

rotate the pattern 90 degrees and continue combining characters.

Preventive maintenance is recommended. This message is displayed when the machine needs to be maintained.

Once this message appears, it is recommended to take your machine to an

authorized Brother dealer or the nearest Brother authorized service center for

a regular maintenance check. Although this message will disappear and the

machine will continue to function once you press , the message will

display several more times until the appropriate maintenance is performed.

Raise the buttonhole lever. This message is displayed when the buttonhole lever is down, a stitch other

than a buttonhole is selected, and the “Start/ Stop” button, (reverse

stitch button) or (reinforcement stitch button) is pushed.

Remove Dual Feed module from the machine. This message appears when you try to start embroidering with the dual feed

foot attached to the machine. Remove the dual feed foot before entering the

embroidery mode.

Remove Embroidery foot with LED pointer from the

machine.

This message appears when you try to start sewing utility stitches or

character/decorative stitches with the embroidery foot with the LED pointer

attached to the machine.

Remove the embroidery foot with the LED pointer before entering the sewing

mode.

Select a pattern. This message is displayed when there is no embroidery pattern selected and

the “Start/Stop” button, (reverse stitch button) or (reinforcement

stitch button) is pressed.

Select a stitch. This message is displayed when there is no stitch pattern selected and the

“Start/Stop” button, (reverse stitch button) or (reinforcement stitch

button) is pressed.

Set the clock. This message appears when the time/date is not set. Set time/date.

(page 22)

The "Start/Stop" button does not operate with the

foot controller attached. Remove the foot controller.

This message is displayed when the “Start/Stop” button is pushed to sew

Utility stitches or Character/Decorative stitches while the foot controller is

connected. (This message does not appear when embroidering).

Error messages Cause/solution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Brother Innov-is XJ1 Seite 190

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Brother Innov-is XJ1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info