Bedienungsanleitung Brother DCP-197C (Seite 69 von 117) (Englisch)

451170

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

Troubleshooting and Routine Maintenance

Poor print quality Check the print quality. (See Checking the print quality on page 76.)

Make sure that the Printer Driver or Paper Type setting in the menu matches the

type of paper you are using. (See Printing for Windows

or Printing and Faxing for

Macintosh in the Software User’s Guide on the CD-ROM.)

Make sure that your ink cartridges are fresh. The following may cause ink to clog:

 The expiration date written on the cartridge package has passed. (Brother

Original cartridges stay usable for up to two years if kept in their original

packaging.)

 The ink cartridge has been in your machine for over six months.

 The ink cartridge may not have been stored correctly before use.

Make sure you are using Brother Original Innobella™ ink.

Try using the recommended types of paper. (See Acceptable paper and other print

media on page 13.)

The recommended environment for your machine is between 20°C to 33°C.

White horizontal lines appear in text

or graphics.

Clean the print head. (See Cleaning the print head on page 75.)

Make sure you are using Brother Original Innobella™ ink.

Try using the recommended types of paper. (See Acceptable paper and other print

media on page 13.)

The machine prints blank pages. Clean the print head. (See Cleaning the print head on page 75.)

Make sure you are using Brother Original Innobella™ ink.

Characters and lines are stacked. Check the printing alignment. (See Checking the print alignment on page 77.)

Printed text or images are skewed. Make sure the paper is loaded properly in the paper tray and the paper side guides

are adjusted correctly. (See Loading paper and other print media on page 8.)

Make sure the Jam Clear Cover is closed properly.

Smudged stain at the top centre of

the printed page.

Make sure the paper is not too thick or curled. (See Acceptable paper and other

print media on page 13.)

Smudged stain at the right or left

corner of the printed page.

Make sure the paper is not curled when you print on the back side of the paper

with the Print Odd Pages and Print Even Pages settings.

Printing appears dirty or ink seems

to run.

Make sure you are using the recommended types of paper. (See Acceptable

paper and other print media on page 13.) Don't handle the paper until the ink is

dry.

Make sure you are using Brother Original Innobella™ ink.

If you are using photo paper, make sure that you have set the correct paper type.

If you are printing a photo from your PC, set the Media Type in the Basic tab of

the printer driver.

Stains appear on the reverse side

or at the bottom of the page.

Make sure the printer platen is not dirty with ink. (See Cleaning the machine’s

printer platen on page 74.)

Make sure you are using Brother Original Innobella™ ink.

Make sure you are using the paper support flap. (See Loading paper and other

print media on page 8.)

The machine prints dense lines on

the page.

Check Reverse Order in the Basic tab of the printer driver.

Printing (continued)

Difficulty Suggestions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-197C Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-197C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info