Bedienungsanleitung Brother DCP-197C (Seite 70 von 117) (Englisch)

451170

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

The printouts are wrinkled. In the printer driver Advanced tab, click Colour Settings, and uncheck

Bi-Directional Printing for Windows

or Bi-Directional Printing for Macintosh.

Make sure you are using Brother Original Innobella™ ink.

Cannot perform ‘2 in 1 ’ or ‘4 in 1 ’

printing.

Check that the paper size setting in the application and in the printer driver are the

same.

Print speed is too slow. Try changing the printer driver setting. The highest resolution needs longer data

processing, sending and printing time. Try the other quality settings in the printer

driver Basic tab. Also, click Colour Settings, and make sure you uncheck Colour

Enhancement.

Turn off the borderless feature. Borderless printing is slower than normal printing.

(See Printing for Windows

or Printing and Faxing for Macintosh in the Software

User’s Guide on the CD-ROM.)

Colour Enhancement is not

working correctly.

If the image data is not full colour in your application (such as 256 colour), Colour

Enhancement will not work. Use at least 24 bit colour data with the Colour

Enhancement feature.

Photo paper does not feed

properly.

When you print on Brother photo paper, make sure you always load one additional

sheet of photo paper first before loading the paper you want to print on.

Clean the paper pick-up roller. (See Cleaning the paper pick-up rollers

on page 75.)

Machine feeds multiple pages. Make sure the paper is loaded correctly in the paper tray. (See Loading paper and

other print media on page 8.)

Check that more than two types of paper are not loaded in the paper tray at any

one time.

There is a paper jam. See Printer jam or paper jam on page 69. Make sure the paper length guide is

adjusted to the paper size. Do not extend the paper tray when you load A5 or

smaller size paper.

Printed pages are not stacked

neatly.

Make sure you are using the paper support flap. (See Loading paper and other

print media on page 8.)

Machine does not print from

Adobe

Illustrator

Try to reduce the print resolution. (See Printing for Windows

or Printing and

Faxing for Macintosh in the Software User’s Guide on the CD-ROM.)

Copying Difficulties

Difficulty Suggestions

Vertical streaks appear on copies. If you see vertical streaks on copies, clean the scanner. (See Cleaning the

scanner glass on page 74.)

Fit to Page does not work properly. Make sure your source document is not skewed. Reposition the document and try

again.

Scanning Difficulties

Difficulty Suggestions

TWAIN/WIA errors appear when

starting to scan.

Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In

PaperPort™ 11SE with OCR, click File, Scan or Get Photo and click Select to

choose the Brother TWAIN/WIA driver.

OCR does not work. Try increasing the scanner resolution.

Fit to Page does not work properly. Make sure the document is not skewed on the scanner glass.

Printing (continued)

Difficulty Suggestions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-197C Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-197C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info