Bedienungsanleitung Brother DCP-L8450CDW (Seite 126 von 203) (Englisch)

585306

126

Zoom out

Zoom in

Vorherige Seite

1/203

Nächste Seite

118

The headers or footers appear

when the document is displayed on

the screen but they are not on the

printed page.

There is an unprintable area on the top and bottom of the page. Adjust the top and

bottom margins in your document to allow for this (see Unscannable and

unprintable areas on page 27).

The machine prints unexpectedly

or it prints garbage.

Press to cancel print jobs.

Check the settings in your application to make sure they are set to work with your

machine.

The machine prints the first couple

of pages correctly, then some

pages have missing text.

Check that the print settings in your application are available in the machine's

printer driver.

Your computer is not recognising the full signal of the machine’s input buffer. Make

sure you connected the interface cable correctly (see Quick Setup Guide).

The machine does not print on both

sides of the paper even though the

printer driver setting is 2-sided.

Check the paper size setting in the printer driver. You must choose A4 (60 to 105

g/m

The machine does not display the

USB menu when a USB flash drive

is connected to the USB direct

interface.

When the machine is in Deep Sleep mode, the machine does not wake up even if

you connect a USB flash drive to the USB direct interface. Press the Touchscreen

to wake up the machine.

Cannot perform ‘Page Layout’

printing.

Check that the paper size setting in the application and in the printer driver are the

same.

Print speed is too slow. Try changing the printer driver setting. The highest resolution needs longer data

processing, sending and printing time.

If the machine is in Quiet mode, print speed is slower. Check the Quiet mode

setting (see Advanced User’s Guide).

The machine does not print from

Adobe

Illustrator

Try to reduce the print resolution (see Software and Network User's Guide).

Poor print quality See Improving the print quality on page 122.

Paper handling difficulties

Difficulty Suggestions

The machine does not feed paper. If the Touchscreen shows a Paper Jam message and you still have a problem,

see Error and maintenance messages on page 98.

If the paper tray is empty, load a new stack of paper into the paper tray.

If there is paper in the paper tray, make sure it is straight. If the paper is curled,

straighten it. Sometimes it is helpful to remove the paper, turn the stack over and

put it back in the paper tray.

Reduce the amount of paper in the paper tray, and then try again.

Make sure MP Tray is not selected for Paper Source in the printer driver.

Clean the paper pick-up rollers (see Cleaning the paper pick-up rollers

on page 94).

The machine does not feed paper

from the MP tray.

Make sure MP Tray is selected in the printer driver.

Fan the paper well and put it back in the tray firmly.

How do I print on envelopes? Load three envelopes at a time in the MP tray. Your application must be set to print

the envelope size you are using. This is usually done in the Page Setup or

Document Setup menu of your application (see your application’s manual for more

information).

Printing difficulties (continued)

Difficulty Suggestions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-L8450CDW Seite 126

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-L8450CDW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info