Bedienungsanleitung Brother HL-2280DW (Seite 69 von 112) (Englisch)

584577

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Troubleshooting

No printout.  Check that the machine is plugged in and the power switch is turned on.

 Check that the toner cartridge and drum unit are installed properly. (See

Replacing the drum unit on page 36.)

 Check the interface cable connection on both the machine and your computer.

(See the Quick Setup Guide.)

 Check that the correct printer driver has been installed and chosen.

 Check to see if the LCD is showing an error message. (See Error and

maintenance messages on page 40.)

 Check that the machine is online:

(Windows

7 and Windows Server

2008 R2) Click the Start button and

Devices and Printers. Right-click Brother MFC-XXXX Printer. Make sure

that Use Printer Offline is unchecked.

(Windows Vista

) Click the Start button, Control Panel, Hardware and

Sound, and then Printers. Right-click Brother MFC-XXXX Printer. Make

sure that Use Printer Offline is unchecked.

(Windows

XP and Windows Server

2003/2008) Click the Start button and

choose Printers and Faxes. Right-click Brother MFC-XXXX Printer. Make

sure that Use Printer Offline is unchecked.

(Windows

2000) Click the Start button and choose Settings and then

Printers. Right-click Brother MFC-XXXX Printer. Make sure that Use

Printer Offline is unchecked.

The machine prints unexpectedly

or it prints garbage.

 Press Job Cancel to cancel print jobs.

 Check the settings in your application to make sure it is set up to work with

your machine.

 Pull out the paper tray and wait until the machine stops printing. Then turn off

the machine’s power switch and disconnect from the power for several

minutes.

The machine prints the first couple

of pages correctly, then some

pages have text missing.

 Check the settings in your application to make sure that it is set up to work with

your machine.

 Your computer is not recognizing the machine’s input buffer’s full signal. Make

sure that you connected the interface cable correctly. (See the Quick Setup

Guide.)

The headers or footers appear

when the document displays on the

screen but they do not show up

when it is printed.

There is an unprintable area on the top and bottom of the page. Adjust the top and

bottom margins in your document to allow for this. (See Unscannable and

unprintable areas on page 14.)

The machine does not print on both

sides of the paper even though the

printer driver setting is Duplex.

Check the paper size setting in the printer driver. You need to choose Letter, Legal

or Folio [16 to 28 lb (60 to 105 g/m

)].

The machine is not printing or has

stopped printing.

Press Job Cancel.

As the machine cancels the job and clears it from the memory it may produce an

incomplete printout.

Printing difficulties (continued)

Difficulties Suggestions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother HL-2280DW Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother HL-2280DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info