Bedienungsanleitung Brother Innov-is 6750D (Seite 355 von 380) (Englisch)

613559

355

Zoom out

Zoom in

Vorherige Seite

1/380

Nächste Seite

TROUBLESHOOTING

353

Appendix

Loops appear on the

surface of the fabric

when embroidering

The thread tension is incorrectly set. Adjust the thread tension. 233 - 235

The tension of the upper thread is incorrectly set

for the combination of the fabric, thread and

pattern being used.

Use the embroidery needle plate cover. 219

The combination of the bobbin case and bobbin

thread is incorrect.

Change the bobbin case or bobbin thread so

that the correct combination is used.

218

Machine does not

operate

There is no pattern selected. Select a pattern. 91, 156, 190, 265

“Start/Stop” button was not pushed. Press the “Start/Stop” button. 15

Main power switch is not turned on. Turn the main power to ON. 26

Presser foot is not lowered. Lower the presser foot. 15

“Start/Stop” button was pushed with the foot

controller attached.

Remove the foot controller, or use the foot

controller to operate the machine.

The “Start/Stop” button was pressed while the

machine is set for the sewing speed controller to

control the zigzag stitch width.

Use the foot controller instead of the “Start/

Stop” button to operate the machine, or set

the Width control to OFF in the Sewing

settings.

35, 73

All keys and buttons have been locked by

Press to unlock all keys and

buttons.

65, 67

Embroidery unit does

not operate

There is no pattern selected. Select a pattern. 190, 265

Main power switch is not turned on. Turn the main power to ON. 26

Embroidery unit is not attached correctly. Reattach the embroidery unit correctly. 188

Embroidery frame was attached before the unit

was initialized.

Perform the initialization process correctly. 188

Nothing happens,

even if the LCD

display is pressed

The screen has been locked. Press either of the following keys to unlock the

screen.

—

The fabric feeds in the

opposite direction.

The feed mechanism is damaged. Contact your dealer or the nearest authorized

service center.

—

The LCD screen is

fogged up.

Condensation has formed on the LCD screen. After a while, the cloudiness will disappear. —

CAUTION

• This machine is equipped with a thread detection device. If the “Start/Stop” button is pushed before the

upper threading is done, the machine will not operate properly. Also, depending on the pattern selected,

the machine may feed the fabric even if the needle is raised. This is due to the needle bar release

mechanism. At these times, the machine will make a sound different from what is made during normal

sewing. This is not the sign of a malfunction.

• If the power is disconnected during sewing:

Turn the main power to OFF and unplug the machine.

If you restart the machine, follow the instructions for operating the machine correctly.

Problem Cause Solution Page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is 6750D Seite 355

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is 6750D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info