Bedienungsanleitung Brother MFC-J450DW (Seite 100 von 143) (Englisch)

585608

100

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

Receiving Faxes

Difficulty Suggestions

Cannot receive a fax. Press Hook in Fax mode to make sure your machine has a dial tone. If you hear

static or interference on your fax line, call your local telephone provider.

Check all line cord connections. Make sure the telephone line cord is plugged into

the telephone wall jack and the LINE jack inside the machine. If you subscribe to

DSL, VoIP or MagicJack services, call your service provider for connection

instructions. To lower the modem speed and turn off ECM (error correction mode),

see Telephone line interference / VoIP on page 91.

Make sure the machine is in the correct Receive Mode. This is determined by the

external devices and telephone subscriber services you have on the same line as

the Brother machine. (See Choose the correct Receive Mode on page 27.)

If you have a dedicated fax line and want your Brother machine to automatically

answer all incoming faxes, select Fax Only mode.

If your Brother machine shares a line with an external answering machine, select

External TAD mode. In External TAD mode, your Brother machine will

automatically receive incoming faxes and voice callers will be able to leave a

message on your answering machine.

If your Brother machine shares the line with a Voice Mail subscriber service, see

Voice Mail on page 32.

If your Brother machine is on a line with the Distinctive Ring subscriber service,

see Distinctive Ring on page 33.

If your Brother machine shares a line with other telephones and you want it to

automatically answer all incoming faxes, select Fax/Tel mode. In Fax/Tel

mode, your Brother machine will automatically receive faxes and produce a

pseudo/double-ring to alert you to answer voice calls.

If you do not want your Brother machine to automatically answer incoming faxes,

select Manual mode. In Manual mode, you must answer every incoming call and

activate the machine to receive faxes.

Another device or service at your location may be answering the call before your

Brother machine answers. To test this, lower the Ring Delay setting:

If the Receive Mode is set to Fax Only or Fax/Tel, reduce the Ring Delay

to 1 ring. (See Ring Delay on page 30.)

If the Receive Mode is set to External TAD, reduce the number of rings

programmed on your answering machine to 2.

If the Receive Mode is set to Manual, DO NOT adjust the Ring Delay setting.

Have someone send you a test fax:

If you received the test fax successfully, your machine is operating correctly.

Remember to reset your Ring Delay or answering machine setting back to

your original setting. If receiving problems recur after resetting the Ring Delay,

then a person, device, or subscriber service is answering the fax call before

the machine has a chance to answer.

If you were not able to receive the fax, then another device or subscriber

service may be interfering with your fax reception or there may be a problem

with your fax line.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-J450DW Seite 100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-J450DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info