718903
16
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
Chapter 1
12
f When the WIRELESS LAN indicator
stops blinking and remains lit, the printer
is connected.
Print from the printing software created
with the SDK.
NOTE
It may take more than 1 minute to
establish a wireless LAN connection.
Since it differs depending on the device
and environment, check with the device
manufacturer.
If printing is not possible
In the following cases, the wireless LAN
connection between the printer and iOS
device will be cut, preventing printing.
1 The iOS device has entered sleep
mode.
2 The printer has been turned off.
3 The printer has been switched to
USB mode.
For the cases mentioned above, perform
the operations below to re-establish the
connection.
1 Select the SSID for the ad-hoc mode
for step e on page 11.
2 Select the connection for step a on
page 11.
3 Hold down the (Power) button for at
least 3 seconds to enter wireless LAN
mode, and then select the SSID for the
ad-hoc mode for step c on page 11.
Setting Up the Printer
(With the Default Settings Changed)
1
NOTE
A computer running Windows
®
and
a USB cable are required to change
the printer’s default settings, even if the
printer will be used by an iOS device via
a wireless LAN connection. In the
process, the printer driver for a USB
connection will be installed on the
computer running Windows
®
.
In order to use the printer via a wireless
LAN connection, settings must be
specified on both the printer and the iOS
device. The printer settings will be
specified with the printer driver; however,
the settings on the iOS device must be
specified manually. Specify the settings
according to the procedures in this
manual.
With administrator rights, log onto the
computer running Windows
®
.
If, while specifying the settings, a dialog
box appears, requesting administrator
rights or requesting confirmation to
perform the operation with administrator
rights, follow the instructions.
If, while specifying the settings, a dialog
box appears, requesting confirmation to
continue the installation, continue it.
The descriptions in this manual apply to
wireless network connections that can be
set up using a standard procedures for
your operating system. For any other
cases, refer to the instruction manual
included with your wireless adapter.
a If you have the included CD-ROM, insert
it into your computer’s CD-ROM drive,
and then click [Standard Installation] in
the installer screen that appeared. If the
Web version was download, run the
downloaded file.
Click [Next].
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother PJ-673 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother PJ-673

Brother PJ-673 Bedienungsanleitung - Deutsch - 76 seiten

Brother PJ-673 Bedienungsanleitung - Holländisch - 75 seiten

Brother PJ-673 Bedienungsanleitung - Französisch - 81 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info