718477
138
Zoom out
Zoom in
Vorherige Seite
1/153
Nächste Seite
Troubleshooting
129
14
I want to reset the printer/delete the
data transferred from the computer.
To reset the printer, perform the following procedure:
1 Press and hold the (Power) button to turn the printer off.
2 Press and hold the (Feed) button and the (Power) button for about
three seconds.
3 While pressing the (Power) button, press the (Feed) button six times.
4 Release the (Power) button.
All the transferred data from the computer will be deleted and the printer
settings will be reset to the factory settings.
I want to cancel the current print job.
Make sure that the printer is On, and then press the (Power) button.
Print head, motor, or battery is too
hot.
The thermal head, motor, or battery is too hot.
Head:
If the thermal head becomes too hot, the thermal head may produce
imaging on the paper in areas not intended to be printed. This condition is
normal when printing documents with a lot of “black” content.
The printer will stop and resume printing after the print head has cooled
down.
To avoid or delay this condition, print using a lighter density setting, reduce
the amount of black space being printed (for example, remove background
shading and colours in graphs and presentation documents), and make
sure that the printer has adequate ventilation and is not located in an
enclosed space.
Motor or battery:
Do not use the printer continuously. If the printer is used continuously, the
motor or battery will become too hot. In this case, the printer will stop and
resume printing after the motor or battery has cooled down.
Note
This condition may occur more often when the printer is used at high altitude
(more than about 3,000 m) due to a lower air density available to cool the
printer.
Printer is in boot mode. If you remove the Li-ion battery from your printer while the firmware is being
updated, your printer will restart in boot mode.
Problem Solution
138

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother RJ-2150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother RJ-2150

Brother RJ-2150 Bedienungsanleitung - Deutsch - 155 seiten

Brother RJ-2150 Bedienungsanleitung - Holländisch - 153 seiten

Brother RJ-2150 Bedienungsanleitung - Französisch - 153 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info