718477
139
Zoom out
Zoom in
Vorherige Seite
1/153
Nächste Seite
Troubleshooting
130
14
Network Setup Problems 14
Problem Solution
You are using security software. Confirm your settings in the installer dialog box.
Allow access when the security software alert message appears during the
printer installation.
Your security settings
(SSID/Network Key) are
incorrect.
Recheck and choose the correct security settings.
The manufacturer’s name or model number of the WLAN access point/router
may be used as the default security settings.
See the instructions supplied with your WLAN access point/router for
information on how to find the security settings.
Ask the manufacturer of your WLAN access point/router or ask your Internet
provider or network administrator.
Your printer cannot connect to
the host device using Wi-Fi or
Bluetooth.
Move your printer within about one metre of the mobile device when you
configure the Wi-Fi network settings.
Move your printer to an obstruction-free area.
If a wireless computer, Bluetooth-equipped device, microwave oven, digital
cordless phone, or other device is near your printer or the wireless access
point/router, move the device away from your printer or wireless access
point/router.
Your printer cannot print using
Wi-Fi or Bluetooth.
You are using MAC Address
filtering.
You can confirm the MAC address by printing out the printer information. Press and
hold the (Feed) button on your printer to print the printer information.
Set the Wi-Fi access point/router so that the MAC address of the printer is allowed
for connections.
For more information, see the instructions supplied with your Wi-Fi access
point/router.
Your Wi-Fi access point/router is
in stealth mode (not broadcasting
the SSID).
Enter the correct SSID name during the installation or when using
[Communication settings] in the Printer Setting Tool.
Check the SSID name in the instructions supplied with your WLAN access
point/router and set up your wireless network again.
Your printer is not connected
correctly to the network.
Check the WLAN icon on the LCD.
: The network is connected correctly.
: Your printer is searching for the network.
No icon : The wireless network settings are disabled.
I have checked and tried all of the
above, but still cannot complete
the wireless configuration.
Turn your printer off and on again. Then try and configure the Wi-Fi settings again.
139

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother RJ-2150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother RJ-2150

Brother RJ-2150 Bedienungsanleitung - Deutsch - 155 seiten

Brother RJ-2150 Bedienungsanleitung - Holländisch - 153 seiten

Brother RJ-2150 Bedienungsanleitung - Französisch - 153 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info