Bedienungsanleitung Brother T-106 (Seite 103 von 119) (Englisch)

585661

103

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Troubleshooting and routine maintenance

13 - 6

If you are having difficulty with the fax machine

If you think there is a problem with your fax machine or the way

your faxes look, make a copy first. If the copy looks good, the

problem is probably not the fax machine. Check the chart below

and follow the troubleshooting tips.

DIFFICULTY SUGGESTIONS

Printing or Receiving Faxes

Condensed print

and white streaks

across the page or

the top and bottom

of sentences are

cut off.

If your copy looks good, you probably had a bad

connection, with static or interference on the phone

line. If the copy looks bad, clean the scanner.

(See Cleaning the scanner on page 13-9.) If the

problem continues, call Brother or your dealer for

service.

Vertical black lines

when receiving.

Your machine’s print head might be dirty. Clean the

print head. (See Cleaning the print head on page 13-8.)

The sender’s scanner may be dirty. Ask the sender to

make a copy to see if the problem is with the sending

machine. Try receiving from another fax machine.

If the problem continues, call Brother or your dealer for

service.

Phone Line or Connections

The fax machine

does not answer

when called.

Make sure receive mode is not set to MANUAL.

(See Choosing the Receive Mode on page 5-1.) Check

for a dial tone. If possible, call the fax machine to hear

it answer. If there is still no answer, check the

telephone line cord connection. Connect a standard

telephone to the fax machine’s telephone socket. If

there is no ringing when you call the fax machine, ask

your telephone company to check the line.

External

Telephone

answering device

(TAD) does not

answer when

called

Make sure that the external TAD is connected

correctly. (See

Connecting an external telephone

answering device (TAD) on page 1-9.) Make sure the

TAD is set to answer calls.

No dial tone on the

handset

Press Speaker Phone (FAX-T106 only)—OR—Lift the

handset. If you don’t hear a dial tone, check telephone

line cord connections at the fax machine and wall

socket. Check that the handset is connected to the fax

machine’s handset socket. Test the wall socket with

another single line telephone. If there is no dial tone at

the wall socket, call your telephone company.

Receiving Faxes

Cannot receive a

fax

Make sure that the fax machine is in the correct

receiving mode for your setup. (See Choosing the

Receive Mode on page 5-1.)

If there seems to be interference on your phone line, try

setting the Compatibility to BASIC. (See Compatibility

on page 13-4.)

If you connect your fax machine to PABX or ISDN, set

the Phone Line Type to your phone type. (See Setting

the Phone Line Set on page 4-5.)

Sending Faxes

Cannot send a fax Ask the other party to check that the receiving machine

has paper.

Print the Transmission Verification Report and check

for an error. (See Printing reports on page 10-1.)

Poor sending

quality.

Try changing your resolution to FINE or S.FINE. Make

a copy to check the fax machine’s scanner operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother T-106 Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother T-106

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info