Bedienungsanleitung Brother T-106 (Seite 104 von 119) (Englisch)

585661

104

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

13 - 7

Troubleshooting and routine maintenance

Dialling does not

work

Check all line cord connections.

Check the power cord connection.

Send a manual fax by pressing Speaker Phone (for

FAX T-106 only) or by lifting the handset and dialling

the number. Wait to hear fax receiving tones before

pressing Fax Start.

Change the Tone/Pulse setting. (See Setting Tone or

Pulse dialling mode

on page 4-5.)

Vertical black lines

when sending.

Use the fax machine to make a copy. If the copy shows

the same problem, the scanner area is dirty. Lift the top

cover and check the document path. Clean the white

film and the scanner’s glass strip using isopropyl

alcohol and a lint-free cloth. (See Cleaning the scanner

on page 13-9.)

Transmission

Verification Report

prints “RESULT

ERROR”

There is probably temporary noise or static on the

phone line. Try sending the fax again.

Try setting the Compatibility to BASIC.

(See Compatibility on page 13-4.)

If the problem continues, call the telephone company

to check your phone line.

Handling Incoming Calls

Double-ring in

FAX/TEL mode

The fax machine knows the incoming call is not a fax

so it is signaling you to answer the telephone call. Pick

up the fax machine’s handset or answer from an

extension phone, and then press the fax machine’s

Telephone Answer Code (default setting is #51).

(See For FAX/TEL mode only on page 5-6.)

Transferring a call

to the fax machine

If you have answered at the fax machine’s handset,

press Fax Start and hang up immediately.

If you answered at an extension phone, press your

three-digit Fax Receive Code (default setting is 51).

When the fax machine answers, hang up.

The fax machine

“hears” voice as

fax tone

If the fax machine is set to Fax Detect ON, it is more

sensitive to sounds. The fax machine may mistakenly

interpret certain voices or music on the line as a calling

fax machine and respond with fax receiving tones.

Deactivate the fax by pressing #51 if you are at an

extension phone or press Stop/Exit if you are at the

fax machine or an external phone.

Try avoiding this problem by turning Fax Detect to OFF.

(See Recording the Fax/Tel Outgoing Announcement

(F/T MESSAGE) (FAX-T106 only) on page 5-3.)

Custom features

on a single line

If you have Call Waiting, Voice Mail, an alarm system

or any other custom feature on a single phone line with

the fax machine, it may create a problem sending or

receiving fax data.

For example: If you are sending or receiving a fax

message while a custom feature signal comes through

on the line, the signal can temporarily interrupt or

disrupt the fax data. Your fax machine’s ECM feature

should help overcome this problem. This condition is

related to the telephone system industry and is

common to all devices that send and receive data on a

single, shared line with custom features. If avoiding a

slight interruption is crucial to your business, we

recommend a separate phone line with no custom

features.

DIFFICULTY SUGGESTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother T-106 Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother T-106

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info