Freestyle 90/130/1200 Additional Handsets
35
To erase a registration code
• Press the QUICKDIAL button.
• Press the
CHANNEL SEEKER
button.
• Press the
✱ button four times.
• Press the
QUICKDIAL button.
You will hear a confirmation
beep. The old registration code is
now erased and you can re-
register your additional handset
following the procedure below.
To re-register an additional
handset
If necessary, you can re-register
your additional handset by simply
following the steps described in ‘To
register an additional handset’ on
the previous page.
Before re-registering, the old
registration code must first be erased.
To check that your additional
handset is registered correctly
• Lift the additional handset.
• Press the TALK button.
• The IN USE light on the base unit
will come on.
• Listen for the dial tone.
If you do not hear a dial tone, your
additional handset is either out of
range of your Freestyle 1200, the
Freestyle 1200 phone line cord is
not plugged in, it has not been
registered properly or you may
have purchased the wrong handset
- check that your handset has item
code: 871267. This can be found on
the side of your giftbox.
Setting the handset
number
Each additional handset must be
assigned an identity number (2, 3
or 4). Your Freestyle 1200 handset
is already numbered as
HANDSET 1.
Additional handsets can then be
numbered as they are added.
To set a handset identity number
• Press the QUICKDIAL button.
• Press the
SECRECY button.
• Enter the identification number
(2-4) using the keypad.
• When you have entered the number,
press the
QUICKDIAL button.
• You will hear a beep confirming
that the new number has been
stored.
Your Freestyle additional handset is
pre-set to handset number 2.
Make a note of the identification
number by writing it on the handset’s
directory label.
