Bedienungsanleitung Bushnell Onix 400-2 (Seite 23 von 32) (Englisch)

481956

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

USING YOUR ONIX400 GPS RECEIVER : The My Stuff Menu

“Add Fence Post”. If you continue to set additional points, you will see more

options appear in the Measuring menu

(Fig. 43)

. You can clear all ruler guides

and start over, or select “Close Region” to turn three or more points into a

Map Area and measure its area in square yards or miles. The regions created

by your rulers can be saved as Routes or Map Areas. Open regions are saved

as routes and closed regions are saved as Map Areas. They will be stored

in My Routes and My Map Areas. A “Measuring Info Box” is automatically

displayed when drawing rulers, displaying relevant data: Distance to Cursor,

Total Length, Last Segment Length and Total Area.

• Update Data:

select this option and press the Right button to choose:

Update Now (updates weather information to the latest available),

Auto Update (let the ONIX update weather info automatically on a

regular basis) or Data Status (monitor the age of the displayed weather

data, reception status, XM satellite signal strength, etc).

• SafeTrack: select and press OK to enter SafeTrack mode, or to see the

SafeTrack options. See “SafeTrack™ Battery Conservation Mode” on the next

page for more details.

The My Stuff Menu

From the HOT Menu, press “+” or “-” to see the “My Stuff” menu (Fig. 44).

This menu lets you work with your personal waypoints, trails, map areas,

etc that you have already created. The “My Stuff” menu items are:

• Where Am I?: This item functions as already described in the HOT menu,

it’s simply available under “My Stuff” as well, for your convenience.

• My Waypoints: Press OK to see a list of all the waypoints you have marked.

Select one and press OK to edit, delete or navigate to the waypoint. Or,

press the Right key to view the waypoint on the base map (cursor moves

to the waypoint)

• My Trails: A trail is a path or course that been started (by moving) or

previously completed and saved by the user. Press OK or the RIGHT key.

The options here are (Fig. 45):

Start New Trail: select this to begin a new trail, for example, from a

parking lot or other landmark to your camp.

Trail List-your previous trails (if any) are listed below “Start New Trail”.

Highlight a trail name and press OK to see these 4 options (Fig.

Navigate To: navigate a saved trail. This starts navigation through a

previously completed trail.

Reverse-press OK to navigate the selected trail from its endpoint to

its start (very useful to “go back” to a point of origin)

Edit Name: option to rename a previously saved trail. Especially

useful if you saved a trail with the “default” name.

Delete: deletes a previously saved trail from memory.

Fig 46.

My Trails-

Options After Selecting a

Saved Trail

Fig 47.

My Trails-

End & Save Trail

Fig 45.

My Trails Options

Fig 44.

My Stuff Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bushnell Onix 400-2 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info