Bedienungsanleitung Caliber mcd 163 (Seite 9 von 18) (Englisch)

168721

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

searches AF. The unit doesn't search this

AF (DIP) for few minutes. In the case of the

AF of NO RDS signal with high field

strength, if the real AF is wrongly masked

as DIP by some interference, the unit

hesitates to search real AFs. For this

reason, the unit has the user option (MASK

DPI) which doesn't mask the AF of NO RDS

signal with high field strength. In MASK DPI

mode, the wrong sound or long mute

(according to PI SOUND or PI MUTE) can

be heard from the AF station which has NO

RDS signal and of which the field strength is

higher than that of the currently tuning AF

(station). But, these phenomenons are rare

and the user will hardly hear the wrong

sound in whole Europe.

Mask only the AF which has different PI.

Mask the AF which has different PI and

NO RDS signal with high field strength.

Press button to operate as the

conversion of each display mode as

follows:

In radio mode: PS ->CT ->FREQ ->PTY

In CDP mode:CDP ->CT ->(ID3 TAG) -

>PS ->FREQ ->PTY

* In case of no receiving CT or PTY

Information, the display shows as “NO

CLOCK” or “NO PTY”.

- MASK DPI mode:

- MASK ALL mode:

DISP

- In case of receiving a RDS station

- BEEP 2’ND mode:

PRESET 1-6

BAND/LOUD

AMS/MP3

- BEEP ALL mode:

- BEEP OFF mode:

BAND/LOUD

The beep is only heard when the second

function of the dual function button is

pressed long (2 sec). e.g.

When button( ) is pressed.

When button is pressed.

The beep sound is heard when every key

is pressed.

The beep is disabled.

Press the for 2 seconds to

reinforce the bass output. Press it for a few

seconds again to cancel the function.

Loudness Function

INFORMATION DISPLAY

- In case of receiving a non RDS station

Notes:

1. When a call comes in

In radio mode: “NO CLOCK” ->FREQ-

>”NO PTY”

In CD mode:CD -> NO CLOCK -> FREQ -

>“NOPTY”

Each displaying time is several seconds,

and come back to 1'st position after several

seconds.

CT = clock time FREQ = frequency.

Pressthe buttontoturnonthe

equalization function and to select desired

audio mode. There are four kinds of mode

as below:

Exhibit current frequency and activated

functions on the LCD display.

The led display will flash if the front panel is

not inserted into the main unit.

When a call is received, 'TEL CALL' is

displayed and all the unit functions are

temporarily interrupted.

Equalization

LCD DISPLAY

FLASHING LED

ESP FUNCTION

TEL Mute

The audio system automatically mutes

whenever a call comes in.

Note: the function will not work if a cable is

not connected to the car phone.

To select playback mode

In power on mode, press button

repeatedly to select the different modes as

the following sequence: RADIO, DISC (with

a CD/MP3/WMA disc inside the disc slot) ,

USB(with a USB device inside the USB

port), SD card(with a card inside the card

slot) or AUX mode.

This unit has the electronic shockproof

feature. So that if the unit skips due to rough

road conditions, the playback of the disc /

USB / SD will be uninterrupted.

MODE

BEEP 2’ND/ALL/OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber mcd 163 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber mcd 163

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info