Bedienungsanleitung Cambridge 751RV2 (Seite 15 von 40) (Englisch)

581025

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

751R V2azur

ENGLISH

1 Front left and right speakers

For stereo and multi-channel sound.

2 Centre speaker

For dialogue and centre sounds. Ideally position at a similar height to the

front left and right speakers (above or below the TV/monitor). Using a centre

speaker from the same manufacturer/range as used for the front left and

right speakers is advisable. This "timbre matching" allows surround effects

to ow more naturally from left to right without obvious transitions between

the speakers.

3 Surround left and right speakers

For ambient and multi-channel sound. Floorstanding speakers should be

angled towards the listening position. Bookshelf/standmount speakers

should be wall mounted or used with dedicated speaker stands, positioned

at or above ear height.

4 Subwoofer

For improving the bass in your system, as well as reproducing dedicated

LFE (Low Frequency Effects) cinema effects when playing Dolby Digital or

DTS encoded discs. Your subwoofer can often be placed almost anywhere

in the room as bass is less directional, but experimentation with positioning

is recommended.

5 Surround back left and right speakers

Individual back speakers in place of a single surround back. Used with the

7.1 processing types. Remember to experiment with the positions until you

are happy with the sound.

6 Front left and right height speakers

Height speakers placed above the Front Left and Right to give the sound

eld a vertical component with suitably encoded material or when using

Dolby Pro Logic IIz post processing.

In all cases the 5.1, 5.1+H or 7.1 in fact relate to the maximum number of

speakers that can be used, as the Centre, Sub and Surround speakers can

all be deleted if required (although of course performance is reduced). For

example, if you choose not to use a Centre Channel speaker you can set this

to 'None' in the settings as shown later and the 751R V2 will automatically

redirect the centre channel audio information into the Left and Right Front

channels, creating what is known as a 'Phantom Centre'.

Similarly, you might decide not to use a subwoofer if your main Left and Right

speakers are capable of reproducing enough bass for a satisfying music/

movie experience. The 751R V2 will then automatically re-direct the bass

from the Subwoofer/Low Frequency Effect channel to the Left and Right

Front Speakers.

Performing the setup

Note: This setup is important as the 751R V2 will also automatically use this

information to select appropriate Dolby and DTS decoding modes dependant

not only on the source material but also the speaker package it knows you

have.

Enter

Vol

azur 651R Main Menu

Speaker Setup

HDMI/Component Assign

Video Input Select

Scaler Assign

Video Processing Settings

Audio Input Select

Tone/Sub/LFE Config.

Rec.2/Zone2 Output Select

Advanced Setup

Quit I/O

To tell the unit the type of package you have, turn on the On-Screen Display

via the remote button as shown. Highlight the 'Speaker Setup' menu by using

volume up and down on the remote then go to it by pressing Enter button.

Then go to 'Speaker Conguration' and select it by pressing the Enter button.

Set the Decode mode as 5.1, 7.1 or 5.1+H by highlighting the Decode Mode

item and using the Left and Right arrows to scroll through the options:

Speaker Config Menu

Decode Mode :

Front L/R :

Center :

Surr. L/R :

Surr. LB/RB :

Subwoofer :

[FL R must be Large when

Sub is Off]

Return I/O

7.1

Large

Yes

751R V2 setup Background information

The full setup of the 751R V2 is a reasonably simple 3 stage process. The

Speaker Setup stage can either be performed manually or via the Audyssey

Auto Setup procedure.

Stage 1: Speaker setup (Speaker delay, Crossovers and Level calibration, via

Audyssey or manually)

Stage 2: Assigning HDMI and Analogue video inputs

Stage 3: Source setup

Speaker setup

To perform a manual speaker setup you always need to rst tell the unit what

kind of speaker system you have connected.

If you prefer to use the Audyssey autosetup process then you don't need to

tell the unit what kind of speaker system you have if it is a simple 5.1 or 7.1

system, Audyssey will work this out for itself.

However if you wish to use 5.1 + Height mode or 5.1 with the rear SBL/SBR

reassigned to biamping the fronts or 5.1 with the SBL/SBR outputs driving

Zone 2 speakers, then you must tell the unit this before performing any

Audyssey autosetup.

In any case setting the speaker conguration before running Audyssey will

not do any harm.

The options are 5.1, 7.1 or 5.1+H as shown below. The 751R V2 can support

up to a 7.2 speaker setups which means 7 speakers (Front Left, Front Right,

Centre, Surround Left, Surround Right, Surround Back Left, Back Right) plus

two mains powered subwoofers (the .2).

Refer to the diagrams below for typical examples of loudspeaker setups.

Always adjust the speaker and listening positions until you are happy with the

sound. Please refer to your loudspeaker and subwoofer manuals for more

detailed positioning information.

5.1

5.1 + Height

7.1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge 751RV2 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge 751RV2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info