Bedienungsanleitung Cambridge 751RV2 (Seite 30 von 40) (Englisch)

581025

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

You can use the Volume knob or the Vol and Vol buttons to make

changes to the picture or press the Pic.Adj. button again to move to the next

item.

Adjustments are available for Brightness, Contrast, Saturation, Sharpness

and Y/C Delay.

A second feature of the Picture Adjustment button on the unit's front panel

is setting the output resolution for the scaler (this can also be done in the

OSD see earlier section).

If the front panel (not remote) button is pressed and held for approx. 10

seconds the 751R V2 will show the current scaler output resolution on the

751R V2's front panel display. Holding for a further 10 seconds will change

the output resolution to the next available one (and allow time for the TV to

re-sync).

Holding further will continue the process and the video output will gradually

move through all possible resolutions 480p 60Hz, 576p 50Hz, 720p 50Hz,

720p 60Hz, 1080i 50Hz, 1080i 60Hz, 1080p 50Hz and 1080p 60Hz (and

back round).

This feature can be useful if the scaler output is accidentally set to a

resolution your TV does not support and picture is lost.

By pressing and holding the Pic.Adj. button, you can cause the 751R V2 to

scroll through all resolutions automatically. Simply let go of the button when

a visible video image at a suitable resolution appears.

Audio split mode

In some circumstances the 751R V2 is able to allow the user to view one

source whilst listening to another. For instance you could watch the video

of a sports channel whilst getting an audio commentary from another such

as the Tuner.

To perform Audio Split:

1. Select the source you wish to watch in the normal way.

2. Press and hold the button on the front panel (not remote) for the source

you wish to listen to. After 4 seconds approx "Audio Split" will scroll across

the display and you will now be listening to that source instead. Video will

not have changed.

1 2

The 751R V2 allows splitting from any source whatever its video input

type (Composite, S-Video, Component or HDMI) but only to sources where

analogue or digital audio is the current audio input type, not HDMI.

If the combination is not allowed "Mode Unavailable" will instead scroll

across the display and no change will be made. To cancel audio split mode

simply select a new source and normal operation will be resumed.

HDMI A and B outputs

The 751R V2 has two HDMI outputs allowing the connection of two TVs

or a TV and projector etc. Both outputs show the same picture. HDMI A

also features an Audio Return Channel for TVs that feature this (see earlier

section).

To switch between only HDMI A active, HDMI B active or HDMI A and B both

active select the HDMI/Component Assign menu in the OSD and highlight

the HDMI Out menu item. Use the left and right buttons to scroll though the

options.

HDMI/Component Assign

HDMI 1 :

HDMI 2 :

HDMI 3 :

HDMI 4 :

HDMI 5 :

Component 1 :

Component 2 :

Component 3 :

HDMI Out :

Return I/O

BD/DVD

VIDEO 1

VIDEO 2

Recorder 1

AUX

BD/DVD

VIDEO 1

VIDEO 2

A+B

Alternatively, press and hold the Pic. Adj. button when the OSD is on, scrolls

the output from HDMI A to HDMI B to HDMI A+B and so on.

Note: The 751R V2 also shows the active HDMI outputs on the front panel

display of the unit itself whenever the OSD is on.

This is so you can still see what the active outputs are even if the OSD

disappears if you turn off the HDMI output you have connected to your TV.

HDMI bypass

The 751R V2 features an HDMI bypass mode that copies the incoming HDMI

to the output without internal reception or processing.

This does not necessarily mean all future standards will pass through

however if they use new pixel clock rates or bit depths that the 751R V2

HDMI 1.4 chipset cannot support.

This feature has been included to allow some measure of compatibility with

any future unsupported audio/video formats as they can be sent directly to

the TV/Projector.

It can also be useful if you have a TV with built in speakers and would like to

send the incoming source to the TV for decoding rather than have the 751R

V2 do the decoding.

To select HDMI Bypass select the Advanced Setup menu from the main

OSD screen, then the Advanced Audio menu and highlight the HDMI Bypass

menu item.

Uses the ◄ ► buttons to switch between Normal (HDMI reception) and

Bypass modes.

Advanced Audio Setup

Multi Ch.Out :

HDMI Bypass :

TV ARC(HDMIA) :

Auto Power Down :

Return I/O

Normal

Bypass

Disable

Enable

Trigger outputs

The 751R V2 feature two trigger outputs that can be used to signal to

external devices for simple automation functions.

Examples might be using the Triggers to open or close curtains, tell a

projection screen to roll up and down or turning on/off external power amps

etc.

The outputs are 0V for Off and 12V for On at up to 100mA. The connections

are 3.5mm mono mini-jacks, with the tip as the output, ring as ground.

To choose how the triggers operate select the Advanced Setup menu from

the Main Menu, then select the Trigger A (or Trigger B) menu item, the

options are:

Advanced Setup Menus

Advanced Audio

Input Name Assign

Advanced Dolby/DTS

Advanced Audyssey

Trigger A

Trigger B

OSD Setup/SW Version

Return I/O

Manual Select: Yes/No – When enabled this means the trigger output can

be toggled On and Off by the matching Trigger button on the remote control.

If disabled these buttons will have no effect.

Note: When enabled the remote buttons can be used to toggle the outputs

(override the status) even if they are also following the status of a zone or

source selection as below.

Follow Standby: Yes/No/Zone 2 – this means the trigger output can follow

the On/Off status of the Main Zone or alternatively that of Zone 2.

Sources: Yes/No – the trigger output can be made to go high when one or

more specic sources is selected.

Note: Follow Standby and selecting any Sources are mutually exclusive

options.

Cambridge 751RV2 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge 751RV2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info