Bedienungsanleitung Cambridge Audio CXC (Seite 6 von 9) (Englisch)

656743

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Remote control

The CXC is supplied with a remote control handset that duplicates the front

panel control functions and is also able to control other CX series products.

The supplied AAA batteries must be tted before the remote control can be

used.

The handset buttons function as described in the following paragraphs.

1. Bright

Alters the brightness of the display backlight. There are three levels of

brightness: Bright, Dim and O.

2. Standby/On

Switches the amplier between On and low power ecofriendly Standby mode.

3. Play / 4. Pause / 5. Stop

Press the relevant button to play, pause or stop the CD.

6. Open/Close

Opens and closes the disc tray.

7. Scan

Press and hold to scan within the selected track. Hold down for seven

seconds to increase scan speed. Press the right button to fast forward, the

left button to rewind.

8. Skip

Right Skip – Press to skip forward by one track on the CD.

Left Skip – Press to skip backward by one track on the CD.

9. Repeat / 10. Random

Read the 'Operating Instructions' section of this manual for information on the

functions of these buttons.

Note: these buttons will function only when the display backlight is in either

'Bright' or 'Dim' modes. If it is set to 'O', the functions do not respond.

Rear panel controls

1. AC power socket

Once all other connections are made, connect the supplied power cable to

the CXC power socket and to an appropriate mains socket. The CXC is now

ready for use.

2. Mains voltage selector switch

Switches the CXC mains voltage between 115V and 230V.

Note: For use by Cambridge Audio service personnel only!

3. Control bus

In – An RCA phono socket that enables un-modulated commands from multi-

rooms systems or other components to be received by the CXC.

Out – An RCA phono socket that provides control bus output commands for

further downstream units.

4. IR (Infra Red) In

A 3.5mm mini-jack socket that enables modulated IR commands from multi-

room or IR repeater systems to be received by the CXC.

Note: Commands received by the IR In socket are not looped out of the

Control Bus. Refer to the 'Custom Installation' section for more information.

In Out

InOut

Mains Voltage Selector Switch:

100-120V/220-240V AC~50/60Hz

S/P DIF

Co-axial

Toslink

Optical

Digital Outputs

IR In Control Bus

IR InControl Bus

Power AC

www.cambridgeaudio.com

Max Power Consumption: 25W

CXC Compact Disc Player

Designed & Engineered in UK

Made in China

1 2 3

5. Digital inputs

The CXC has two digital outputs in total, S/P DIF co-axial and Toslink optical

sockets.

Coaxial – To obtain best results, use a high quality 75 ohm digital RCA

interconnect cable (not one designed for normal audio use).

Toslink Optical – Use a high quality TOSLINK bre optic interconnect cable

designed specically for audio use.

4 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio CXC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio CXC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info