Bedienungsanleitung Cambridge Audio CXC (Seite 8 von 9) (Englisch)

656743

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Custom installation (C.I.) use Technical specications

Troubleshooting

The CXC feature a Control Bus input/output that allow un-modulated remote

control commands (positive logic, TTL level) to be received electrically by

the unit and looped to another unit if desired. These control commands are

typically generated by custom installation (multi-room) systems or remote IR

receiver systems. The Control Bus sockets are colour-coded orange.

An IR Emitter Input is also provided that allows modulated IR remote control

commands to be received electrically by the unit. Commands on this input

operate the unit only and are not looped out demodulated on the Control Bus

Output.

In addition the units feature ‘direct’ IR/Control codes as well as toggle

codes for some of their features to simplify programming custom installation

systems. Special direct On/O commands can be accessed on the supplied

remote control for teaching into C.I. systems or learning remotes as follows:

1. To send a discrete Power On command, press down the skip back button

and the power toggle button.

2. To send a discrete Power O command, press down the skip forward

button and the power toggle button.

A full code table for this product is available on the Cambridge Audio website

at www.cambridge-audio.com.

Total correlated jitter <140pS

S/PDIF output impedance <75ohms

or TOSLINK optical

Digital audio outputs S/PDIF coaxial and

TOSLINK optical

Maximum power consumption 25W

Standby power consumption <0.5W

Dimensions (H x W x D) 85 x 430 x 315mm

(3.3 x 16.9 x 12.4”)

Weight 4.7kg (10.3lbs)

There is no power

Ensure the AC power cord is connected securely.

Ensure the plug is fully inserted into the wall socket and is switched on.

Check the unit is switched on at the rear panel.

Check fuse in the mains plug or adaptor.

The player will not read the disc

Check the disc is not loaded upside down.

Check that the disc is not too scratched or dirty.

There is no sound

Ensure that the amplier is set correctly.

Check that the interconnects are inserted correctly.

The disc is skipping

Check that the disc is not too scratched or dirty.

Ensure the player is on a rm surface and not subject to vibrations.

There is a hum coming from the speaker

Ensure that all cable connections are secure.

The remote handset will not function

Check that the batteries have not expired.

Ensure that nothing is blocking the remote sensor.

In the event that the above solutions do not remedy your problem, please

consult our frequently asked questions (FAQ) section on our website:

techsupport.cambridgeaudio.com

You can also use this facility to post a question to our Technical Support

team.

For all servicing, in or out of warranty, please contact your dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio CXC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio CXC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info