Bedienungsanleitung Cambridge Audio Sonata NP30 (Seite 14 von 20) (Englisch)

497526

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Optional BT100 Bluetooth adaptor (not supplied)

When connected to your NP30 this adaptor allows the NP30 to receive

BluetoothAudio (known as Bluetooth Advanced Audio Distribution Profile or A2DP).

Contact your dealer for details.

The BT100 supports Bluetooth A2DP using either the original SBC encoded form or

the latest higher quality apt-X encoded form.

SBC and apt-X refer to the encoding used over the wireless Bluetooth interface only

and not the format your music may be in, which can be any type that your phone/

laptop or other playing device supports.

Your playing device plays your files then re-encodes the playback before streaming

it to the BT100 in one of these two formats.

Many phones and laptops now feature Bluetooth with A2DP. SBC should be

supported by all such devices (it is the madatory format for A2DP).

apt-X is optional, so check if your sending device supports it, if you wish to achieve

the highest quality audio transfer.

Note: The BT100 declares that it can handle both SBC and apt-X to the sending

device which will then use whichever version it supports.

What is apt-X?

apt-X is a high quality CODEC (CODer/DECoder) i.e. a way of compressing audio

data so it can be sent over a link such as Bluetooth then decompressed on the

other side (if both devices support it).

If your Bluetooth audio source does not support apt-X, the BT100 will fall back to

using the standard SBC CODEC that is supported by all Bluetooth audio devices.

BT100 controls and connections

A. Pairing button/Status LED

Button performs pairing and related functionality. Integrated LED indicates

BT100 status.

B. USB plug

Streams high quality USB audio into your NP30 USB socket.

C. Extension Cable

Allows the BT100 to be positioned for accessibility or optimal wireless

reception.

Pairing

To begin streaming high quality music from your chosen media source it will

first need to be paired with the BT100.

A. Insert BT100 into the USB port at the back of your NP30.

B. Wait a moment for the BT100 to be detected. Then double click the button

to enter pairing mode, the BT100 indicates it is in the pairing state by

flashing rapidly.

C. Put your Bluetooth compliant audio source into pairing mode. Please

consult your manufacturer’s user manual on how to do this.

Pairing your BT100 and source establishes an authorised audio link that

can then be used again in the future without having to go through this stage

again.

After pairing you can just select the BT100 and play at any time as long as

your Bluetooth A2DP compatible source (phone/laptop etc.) is within approx.

10m of the BT100.

Normally on your source you will need to select Bluetooth Pairing and then

the BT100 should appear as ‘Cambridge Audio BT100’ in a list of locally

found Bluetooth devices.

Select that item in the list to finish pairing.

D. On successful pairing, the BT100s LED goes off for a second or two, then

triple flashes quickly. The LED then goes off and only lights up in the future

when you are playing audio via Bluetooth.

E. To play back via a paired Bluetooth device, simply select the BT100 on

that device and start playing. The BT100 LED lights up constantly when

streaming SBC or on and flicks off every 2 seconds when streaming apt-X.

Notes:

- You can pair to more than one source up to a maximum of 8 sources at any

time. Pairing to a 9th device will cause the first one to be forgotten and so

on. However as you would expect the BT100 can only play back from one

of these sources at a time.

- When you have finished playback many sources keep the Bluetooth

link active for a time unless you actively tell them to stop by deselecting

playback via the BT100 (do not unpair as this is not necessary).

This can prevent another source to be able to access the BT100.

To immediately use another source, simply deselect the BT100 for playback

on your first source device before starting up on a second.

- Some devices stream empty data all the time even when paused or

stopped. These devices will cause the BT100s LED to be on even if

playback is currently stopped or paused.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Sonata NP30 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Sonata NP30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info