Bedienungsanleitung Cambridge Audio Sonata NP30 (Seite 16 von 20) (Englisch)

497526

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Wired/Wireless connection

It is possible to connect your NP30 to your network via an available Ethernet

connection (RJ45) or via a Wi-Fi router. By default the unit is in AUTO mode, each

time you turn the unit it looks for the presence of a wired connection, and tries to

use this, if none is present or it cannot connect it then tries to use the wireless

connection and so on. In Auto mode once the NP30 has established a certain type

of connection to the network, then this type of connection will remain in use while

the NP30 is on.

You can alternatively configure the NP30 to permanently only use the wired or

wireless connection From the NP30’s ‘Network config’ menu, select ‘Wired/

Wireless’. This menu will present you with three options: ‘Auto’, ‘Wired Only’ and

‘Wireless Only’.

Selecting ‘Wired Only’ will cause the NP30 to reboot and then only use its Ethernet

connection to communicate with the network. Selecting the ‘Wireless Only’ will

cause the NP30 to reboot and only use its Wi-Fi connection. Selecting the ‘Auto’

option means the NP30 will try both and settle on the one it can make work as

described above.

Version

This menu item displays some hardware/software version numbers for your NP30.

Turn the rotary dial to scroll through the various items.

The Service Pack is the currently loaded firmware software. It’s a good idea to

note this down if you need to contact our technical support people as they may

request it.

The Serial Number and Product Code are not normally required by the technical

support team.

Note: This Serial Number is not the same as the physical serial number on the back

of the product itself.

Upgrade Firmware

Use this option to download new firmware for the NP30 from Cambridge Audio

over the Internet.

If you select this item the NP30 will contact our server and see if a newer version of

software is available (‘Checking for updates’ will be shown in the display).

If new software is found the NP30 will prompt you if you want to download it or not.

It is a good idea to update the firmware from time to time to take advantage of any

bug fixes or new features. At this stage, you can press the NP30’s

button to

cancel the firmware upgrade. A Firmware upgrade may take several

minutes.

Note:

– It is very important that once the Firmware upgrade has started you do not

switch off the power to the NP30 until the operation is complete otherwise the

NP30 may become permanently damaged.

– Also do not interrupt the network or internet connection by removing the

Ethernet lead or switching off your router etc.

Language

Allows you to change the display language used.

A list of the currently supported languages will be shown. Select your preferred

one and press enter.

Note: The NP30 will then restart in order to start again in the new language, this

will take approximately 30 seconds.

Factory Reset

Puts all the settings back to their defaults as they were when they left the factory.

The NP30 will ask you if you are sure you want to proceed before performing a

reset.

Note: If you perform a factory reset, you will lose all your presets and any saved

WEP/WPA keys for your wireless network connection.

This will display a key that can be used to register your NP30 on the Stream Magic

portal at www.stream-magic.com. First you will need to set up an account on

Stream Magic. Open www.stream-magic.com from your Internet browser. See the

section earlier on Stream Magic registration.

Note the generated key lasts for about 10 minutes, if you don’t use it in that time

you will need to exit and re-enter this menu to get a new key.

NP30 Name

This menu allows the setting of the declared UPnP Client name for your NP30.

This is the name other UPnP devices (such as control points and remote Apps etc.)

will display when they see the NP30.

The default name will be ‘NP30’ but can be changed to any name you can easily

recall such as ‘Dads NP30’ or ‘Kitchen’ etc.

Digital Pre-amp mode

The NP30 can optionally be used as a digital pre-amp and connected directly to a

suitable power-amp.

Before making this connection, access the NP30’s Digital Pre-amp Mode menu by

pressing the Home button then using the rotary dial to navigate to the Settings-

>Digital Pre-amp Mode submenu.

Press the rotary dial button to enter this submenu and use the rotary dial to select

On.

Finally confirm this setting by pressing the rotary dial again. Once Digital Pre-amp

mode is enabled, the handset Volume Up and Down buttons will affect the signal

output level from the NP30.

The level at both Digital and single-ended Phono/RCA outputs are affected and

either connection type can be used.

Be careful not to turn Digital Pre-amp mode off when connected to a power

amplifier in this way as this returns the output level to an un-adjustable maximum

level for use only into an integrated amplifier or pre-amplifier with its own volume

control.

Remote Code

There are two Options:

Option 1 – is the default and works with the NP30 remote control when also in its

default mode.

Option 2 – gives a secondary code set in cases where the remote codes are found

to clash with another remote handset.

If Option 2 is selected on the NP30 then the remote handset must also be set to

Option 2 remote codes as well as follows:

Press and hold down the

button whilst inserting the batteries to switch to

Option 2.

By inserting the batteries without the

button held down will default to Option1.

Auto Power-down

The NP30 will switch itself off after 15 minutes if it is not playing anything and

there has been no user interaction with it during this time. As a default this is set

to 15 minutes, but you can increase or decrease this time, or turn this feature off

altogether if desired.

The Auto Power Down setting can be found in Settings > Automatic Power Down.

There, using the rotary dial you can adjust APD from OFF to 1hr, in 5 minute

increments. Press the rotary dial to accept the new APD setting.

Cambridge Audio Sonata NP30 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Sonata NP30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info