Bedienungsanleitung Cambridge Audio Stream Magic 6 V2 (Seite 16 von 20) (Englisch)

656763

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

The Stream Magic 6 will then connect to the network using a saved key (if you have

previously set one) or present you with an alphanumeric entry menu. Here you can

enter the network key you set up when setting up your wireless network.

Select each character in turn using the Navigation/Select dial and then press

or navigate to the

symbol and press Navigation/Select dial to enter that key. If

you make a mistake, press

to go back one character.

The Stream Magic 6 can handle keys in WEP, WPA and WPA2 formats (the choice of

format is made by appropriate settings on your router) and automatically generates

the right format from your text according to the router request.

Enter the network name

This option allows the Stream Magic 6 to search for and connect to a particular

network name only.

Type your network name in using the alphanumeric entry screen.

If no matching network is found 'Network not found' will be displayed.

View Cong

This menu rstly displays the IP mode (static or dynamic). This will be Auto/DHCP

(i.e. dynamic, this is the default) or alternatively Static IP.

For either mode by turning the Navigation/Select dial the Stream Magic 6 will scroll

through the various current IP parameters, for instance the ESSID of the current

wireless network, Wired and Wireless MAC addresses, current IP address, (Sub)

Netmask, Gateway address etc.

Edit Cong

This menu allows the selection of IP mode between static or dynamic (Auto/DHCP).

Auto/DHCP is recommended for most people in most circumstances. Static IP

requires quite a bit of knowledge about IP networks, and is for advanced users only.

The default setting is thus Auto/DHCP, here the Stream Magic 6 obtains its IP

address each time you switch in on by a process called DHCP which means it is

different each time it is acquired. This process is completely automatic and much

simpler than implementing Static IP.

However sometimes it is useful (especially in large networks) to know the exact IP

address of each device, this can only be done by using static IP.

When using Static IP you will also need to enter the network mask you wish to

use and the addresses of your gateway and DNS service, note there is no way for

Cambridge Audio to know what these are in your network. Only select static IP if you

know exactly what you are doing!

To set static IP, select the 'Settings > Network cong > Edit Cong' menu and then

press SELECT.

The Stream Magic 6 will now display 'Auto (DHCP)? YES/NO'. Turn the Stream

Magic 6’s rotary dial to select 'NO' and then press SELECT.

You will now be able to enter the xed IP address you wish to give your Stream

Magic 6 by using the rotary dial to select the desired numbers followed by pressing

Navigation/Select dial to end inputting the address.

The Stream Magic 6 will now prompt you to enter the required network mask for

the network. You will be able to enter this in the same way as before for entering

the IP address.

You will now need to enter the default gateway’s IP address used by the Stream

Magic 6 on the network.

Finally, you will need to enter the DNS IP address for the Stream Magic 6. On some

networks, you may need to enter your ISP’s DNS IP address, which should be

available on your ISP’s support page on their website.

After entering the above information, the Stream Magic 6 will now try to connect

to your network. If you wish to use DHCP again simply select 'Settings > Network

cong > Edit Cong' and then set 'Auto (DHCP)? YES/NO' to 'YES'.

WiFi Strength

Displays the strength of the received WiFi Signal.

Note: If WiFi has been turned off (Ethernet mode only) the signal strength will show

as 0%.

Signal warning

The Stream Magic 6 can display a warning if the Wi-Fi signal strength is low enough

to be causing reduced throughput.The options for the Signal Warning are simply

Yes or No.

Wi-Fi Region

Different parts of the world use slightly different frequencies for Wi-Fi. For best

performance you should set the Stream Magic 6 to the region you live in, the

current options are US, Spain, Europe (i.e. other than Spain), Japan.

Wired/Wireless connection

It is possible to connect your Stream Magic 6 to your network via an available

Ethernet connection (RJ45) or via a Wi-Fi router. By default the unit is in AUTO

mode, each time you turn the unit it looks for the presence of a wired connection,

and tries to use this, if none is present or it cannot connect it then tries to use

the wireless connection and so on. In Auto mode once the Stream Magic 6

has established a certain type of connection to the network, then this type of

connection will remain in use while the Stream Magic 6 is on.

You can alternatively congure the Stream Magic 6 to permanently only use the

wired or wireless connection From the Stream Magic 6’s 'Network cong' menu,

select 'Wired/Wireless'. This menu will present you with three options: 'Auto', 'Wired

Only' and 'Wireless Only'.

Selecting 'Wired Only' will cause the Stream Magic 6 to reboot and then only use

its Ethernet connection to communicate with the network. Selecting the 'Wireless

Only' will cause the Stream Magic 6 to reboot and only use its Wi-Fi connection.

Selecting the 'Auto' option means the Stream Magic 6 will try both and settle on the

one it can make work as described above.

Firmware

This menu item displays some hardware/software version numbers for your

Stream Magic 6. Turn the rotary dial to scroll through the various items.

The Service Pack is the currently loaded rmware software. It’s a good idea to

note this down if you need to contact our technical support people as they may

request it.

The Serial Number and Product Code are not normally required by the technical

support team.

Note: This Serial Number is not the same as the physical serial number on the back

of the product itself.

Firmware

Version

Upgrade

Version

This menu item displays some hardware/software version numbers for your

Stream Magic 6. Turn the rotary dial to scroll through the various items.

The Service Pack is the currently loaded rmware software. It’s a good idea to

note this down if you need to contact our technical support people as they may

request it.

Cambridge Audio Stream Magic 6 V2 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Stream Magic 6 V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info