Bedienungsanleitung Campingaz Base Camp (Seite 9 von 41) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

658614

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

A - PREPARATION FOR USE

IMPORTANT

This operation manual will help you use your

Campingaz

unit properly and in complete safety.

Consult the manual to familiarise yourself with

the unit, before connecting the gas cylinder.

Abide by the instructions given in this manual.

Failure to do so may be dangerous for the user

and anyone else close by.

Always keep this manual in a safe place, readily

available for reference if necessary.

This unit is manufactured to use either butane or

propane, with a suitable regulator and a hose or

flexible hose, which are sold separately.

This unit should only be used outdoors, and away

from inflammable materials.

Never use a unit that is leaking, that is not opera-

ting properly or that is damaged. Return it to your

dealer, who will indicate the nearest servicing

agent.

Never modify this unit, or use it for applications

for which it was not intended.

A - 1 - Gas cylinder and regulator

This unit can be used with a CAMPINGAZ

butane

cylinder type 904 or 907 and the CAMPINGAZ

28-30

mbar or 50 mbar regulator.

It can also be used with other, larger, butane or

propane reservoirs (6 kg, 13 kg, etc.) and the appropri-

ate relief valves (consult your dealer):

France, Belgium, Luxembourg, U.K., Ireland,

Portugal, Spain, Italy:

butane 28-30 mbar / propane 37 mbar

Norway, Sweden, Denmark, Finland, Netherlands,

Czech Republic:

butane 30 mbar / propane 30 mbar

Switzerland, Germany, Austria:

butane 50 mbar / propane 50 mbar

When connecting or changing a cylinder, always oper-

ate in an open, well-ventilated place, and never in the

presence of a flame, spark or any other source of heat.

A - 2 - Hoses (see fig. 4)

France :

The device must be used with a flexible hose designed

to be fitted into a threaded end piece on the device side

and held in place on the regulator with clamps (XP D

36-110 Standard).

Length must not be greater than 1.50 m. The hose

must be changed if the use-by date has been reached

or if it is damaged or cracked.

Do not pull on the hose or twist it. Keep the hose away

from any parts that may become hot.

Install the hose as described in the assembly instruc-

tions, supplied with the hose and collars.

A gas-tight seal should be checked as described in

Section B).

Belgium, Luxembourg, Netherlands, U.K., Ireland,

Portugal, Spain, Italy, Czech Republic, Norway,

Sweden, Denmark, Finland:

The stove is equipped with a ribbed end-piece for use

with a type of hose suitable for butane and propane.

Hose length should not exceed 1.20 m. It should be

changed if it has been damaged, if it is cracked, or

when national regulations require doing so. Do not pull

on the hose or twist it. Keep the hose away from any

parts that may become hot.

A gas-tight seal should be checked as described in

Section B).

Switzerland, Germany, Austria:

The stove should be used with a type of hose suitable

for butane and propane.

Hose length should not exceed 1.20 m. It should be

changed if it has been damaged, if it is cracked, or

when national regulations require doing so. Do not pull

on the hose or twist it. Keep the hose away from any

parts that may become hot.

Connecting the hose: to connect the hose to the stove

union, tighten the hose nut firmly, but without excessive

force, using the two appropriate wrenches:

- 10 mm wrench to tighten the stove inlet union

- 17 mm wrench to tighten the hose wrench

Connect the other end onto the regulator outlet union.

- A gas-tight seal should be checked as described in

Section B).

B - CONNECTING THE GAS CYLINDER

If replacing an empty cylinder, read Section D):

"Removing or changing the gas cylinder".

When installing or removing a gas cylinder, always

operate in an open, very well-ventilated place, never

in the presence of a flame, spark or any other source

of heat (cigarette, electrical appliance, etc.), and away

from other persons or inflammable materials.

- Place the gas cylinder on the ground, behind or next

to the stove.

- Close the tap on the regulator or gas cylinder.

- Screw or push the regulator onto the cylinder or onto

the valve on the gas cylinder.

- Close the valves on the stove by turning the control

knobs clockwise, position (l) (fig. 1).

- Check that the flexible hose or hose is in place nor-

mally, with no torsion or traction.

- Check that the air holes in the burner tube, close to

the injector, are not obstructed by dust or cobwebs.

Gas leaks

Do not check for leaks using a flame. Use a gas leak

detecting liquid.

- Apply gas leak detecting liquid to the cylinder/regula-

tor/hose/stove unions.

- The adjustment control knobs should remain as set (l).

- Open the gas supply (valve or lever on the regulator).

- Any gas leaks will be indicated by bubbles.

- Stop the leak by tightening the nuts. Replace any

defective parts. The stove must not be used until all

leaks have been eliminated.

- Close the valve on the gas cylinder.

Thank you for choosing this Campingaz

Base Camp / Base Camp Lid stove.

These operation instructions are common to all Base Camp / Base Camp Lid units concerning their accessories and operation.

IFU SG_208_22 - Base Camp - octobre 2011.qxp 10/10/2011 11:48 Page 9

Campingaz Base Camp Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info