Bedienungsanleitung Campingaz Figari 2200 (Seite 8 von 90) (Alle Sprachen)

662271

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Belgium, Luxembourg, United Kingdom, Ireland,

Portugal, Spain, Italy, Croatia, Greece, Netherlands,

Czech Republic, Slovakia, Hungary, Slovenia, Norway,

Sweden, Denmark, Finland, Bulgaria,Turkey, Romania,

Poland:

The barbecue is equipped with a circular connector. It should

be used with flexible hose UK that is suitable for use with

butane and propane gas. hose UK length should not exceed

1.20 meters and should be changed if it has been damaged, if it

is cracked, or when national regulations require doing so.

Do not pull or pierce the hose UK. Keep away from any parts

of the barbecue that get hot. Check that the flexible hose

stretches out normally, without twisting or pulling.

Switzerland, Germany,Austria:

The barbecue should be used with flexible tubing that is

suitable for use with butane and propane gas. Tubing length

should not exceed 1.50 meters and should be changed if it has

been damaged, if it is cracked, or when national regulations

require doing so.

Do not pull or pierce the tubing. Keep away from any parts of

the barbecue that get hot. Check that the flexible hose

stretches out normally, without twisting or pulling.

Flexible tubing connection: To connect the tubing to the

connector on the barbecue, tighten the nut on the tubing firmly

but without excess force using the two wrenches provided:

- no. 20 wrench to

tighten the connector ,

- no. 17 wrench to

tighten the nut on the

tubing

e) Lid

Handle the lid carefully, especially during operation. Do not lean

over the base

f) Checking for gas leaks

1) Work outside, away from all sources of ignition. Do not

smoke.

2) Make sure the control knobs are in the "off" (l) position.

3) Push the end of the

hose completely onto

the regulator nozzle

and secure with a

suitable clip.

4) Fit the regulator onto

the gas cylinder in

accordance with its

instructions.

5) Use a gas leak solution

to test for leaks. Important: never use a naked flame to

check for gas leaks.

6) Apply the solution to the connections cylinder/regulator/

hose/apparatus (the control knobs should remain closed: off

position). Open the gas cylinder valve.

7) Bubbles in the gas leak solution indicate that there are gas

leaks.

8) The leak can be stopped by tightening any hose connection

or replacing any faulty component. The barbecue must not

be used until the leak is stopped.

9) Close the valve on the gas cylinder. Check for leaks at least

once per year and each time the gas cylinder is replaced.

g) Prior to use

Never use the barbecue until the instructions have been read

carefully and understood. Also, make certain that:

- there are no leaks

- the venturi tubes are not blocked

- the hose does not touch any components which may get hot.

- that the ventilation openings in the gas receptacle housing are

not obstructed, if appropriate.

Check that the venturi tubes (VT) cover

the injectors (IJ).

h) Lighting the grill burner

Read steps 1 to 6 before beginning with step 1.

1) Never light the barbecue with the lid closed, only

with the lid open.

2) Make sure the control knobs are in the "off" (l) position.

3) Open the gas cylinder valve.

4) Press one of the 2 control knobs and turn it to the full

flame ( ) position, then immediately press the igniter

button ( ) until you hear the click. Repeat 3 or 4 times if

necessary until the burner is lit.

5) If the burner fails to light, turn the control knob to the "off"

position (l). Wait 5 minutes before repeating the

operation. If your device has an electronic lighting function,

hold the button down for a few seconds to obtain

successive sparks.

6) As soon as the burner is lit, the other burner automatically

lights when the second control knob is placed in the full

flame ( ) position without pushing the automatic igniter

button again.

Important:

If the burner fails to light after the 2

attempt, turn the

control knob to the "off" position (l) and check that the

burner oulets and venturi tubes are not blocked.

i) Grill burner-manual lighting

If the automatic ignition should fail to operate, turn the control

knob to the "off" position (l) and wait 5 minutes.

Remove the droppings tray located under the tank, vertical to

Venturi tube

openings

Venturi tube

openings

Outlet holes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Campingaz Figari 2200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info