Bedienungsanleitung Campingaz Shashlik Rotario (Seite 15 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

662455

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

- 15 -

Turning off the device

When cooking is finished, turn the adjustment wheel (10)

all the way in a clockwise direction (toward the “ – ” end

of the arrow) (fig. 13).

D – CHANGING THE CARTRIDGE

REMINDER

Always insert or remove cartridges in a very well

ventilated area, where there are no flames, heat

sources or sparks (cigarettes, electrical appliances,

cookers, etc.), and well away from other people and

inflammable material. Whenever possible change

the cartridge outside.

The cartridge may be removed even if it is not

empty. Replace the cartridge outside and away from

other people.

- Wait until the device has cooled.

- Check that the gas feed is properly closed by turning

the adjustment wheel (10) all the way in a clockwise

direction (toward the “ – ” end of the arrow) (fig. 17);

check that the stove (12) has been turned off before

removing the gas container.

- Unhook the regulator-cylinder unit from its point of

attachment by lifting it up (fig. 16). Do not pull it toward

you; you may damage the unit holder.

- Holding the regulator (9), unscrew the cylinder (11) by

turning it in the direction indicated in figure 17 and

remove it.

- Insert a new cylinder according to the instructions

given in the “INSERTING A CAMPINGAZ

CV470

PLUS CYLINDER” paragraph.

- Put the regulator-cylinder unit back in place (fig. 14).

Caution:

When changing a cylinder during use, do not touch

the hot surfaces on the device (stove, spit holder

frame, etc.).

Never throw away a cartridge which is not completely

empty, (check there is no liquid in the cartridge by

shaking it).

E – DISASSEMBLY, UPKEEP AND

STORAGE

If you take regular care of your device, it will give you

satisfaction for many years.

Do not clean your device while it is in use. Wait until it

has cooled to avoid being burned by hot parts (drippings

tray, spit holder frame).

Once your equipment has fully cooled:

1 - Storage

- Check that the gas feed is properly closed by turning

the adjustment wheel (10) all the way in a clockwise

direction (toward the “ – ” end of the arrow) (fig. 17);

check that the stove (12) is turned off.

- Disconnect the gas cylinder (11) from the regulator (9)

(see the paragraph on CHANGING THE CYLINDER),

then place the regulator in its storage housing behind

the device (fig. 18).

- Remove the spit motor (8) and place it in its storage

housing behind the device (fig. 21). Fasten it in place

by putting the adhesive band around it.

- Remove the spit holder frame (6) from the burner cage

(7) by pulling it up slightly to free the tabs, then store it

inside the burner cage by positioning the “C” hooks

and “B” stops in the vertical slots at the bottom of the

cage (fig. 19).

- Put the spring (5) back in place by attaching the hooks

at the top and bottom of the burner cage and on top of

the spit holder frame (fig. 20).

- Store the spits (4) in the lower part (fig. 22), then place

the drippings tray (3) upside down on top of them.

- Disconnect the two hooks (2) located at the bottom of

and behind the device. Squeeze them to unlock them

(fig. 23).

- Push the red locking button (15) located behind the

device to the right, then carefully close the device (fig.

24).

- Lock the device:

o Reposition the two hooks (2) at the rear of the

device,

o Raise the hook (16) located on top of the device (fig.

25),

o Fold the feet inside their housing.

Your device is now ready for storing or transporting.

Store the equipment and the cartridge in a cool, dry and

well-ventilated area, out of reach of children. Never store

in a basement or cellar.

If you will not be using the device for a long period of

time, disconnect the cylinder from the device by

proceeding as indicated in paragraph D.

In the case of the injector becoming clogged (the

cylinder still contains gas but the equipment will not

light), do not try to unclog it yourself. Return the

equipment to your retailer.

2 – Cleaning

Body of the device

Clean the device after having removed the gas

cylinder (see paragraph D).

Clean the drippings tray (3), the spits (4), the spit

holder (6) and the internal parts of the device with a

gentle, non-abrasive cleanser, such as dishwashing

detergent, and hot water. Dry with a cloth. Note:

These elements may be washed in a dishwasher.

Ceramic burner parts (12)

The ceramic parts are the active burner components;

they glow when in use. Do not clean or rub them or get

them wet, since this could cause damage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Campingaz Shashlik Rotario Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info