Note: If the power cord or power plug is damaged, it should always be replaced or
repaired by a specialized repair shop.
18. When using the device, ensure adequate space above and around. The device must not
touch any easily flammable objects during work, such as decorations, paper towels, curtains,
clothing, etc.
22. You cannot place the device near flammable materials such as curtains, etc. Keep 1 m
distance to furnitures, walls or other objects.
26. Do not use the device near flammable materials
It is recommended that the electrical installation be equipped with an automatic
residual current circuit breaker with a 30mA starting current for increased safety.
20. In heaters for high-altitude fixtures, the positions of the different positions of the
connectors should be visible from a distance of 1 m
1. Never use the device if it is damaged or does not function properly.
2. Never use the device if it has fallen from a height before and shows visible signs of
damage.
3. Do not use extension cords or other electrical outlets that do not meet the applicable
standards and electrical regulations.
4. Any repairs, dismantling or replacement of any parts should always be made by a
specialized facility.
19. The heater installed in the bathroom should be installed so that connectors and other
regulators can not be touched by a person in the bathtub or under the shower.
15. It should be remembered that some parts of the device and the cabinet during work get
very hot, so be careful and do not touch them, you can get burned.
5. If the device and elements such as electrical contacts are wet, the plug or cable should be
dried before using the device and its components.
13. Do not put NO METAL ITEMS inside the device
23. The device can not be used with external time switches or other separate remote control
systems
16. NEVER cover the device during operation or when it does not cool down completely
21. The labeling for covering the heater should be visible after installing the heater
25. Periodically check the condition of the power cord. If the power cord is damaged, it
should be replaced by a specialist repair facility in order to avoid a hazard
24. Do not expose the device to atmospheric conditions (rain, sun, etc.) or use in conditions
of high humidity (bathrooms, damp camping houses)
II. WARNINGS
14. The manufacturer is not liable for damages resulting from improper use of the device.
17. Remember that the heating elements of the device take time to cool down completely.
7. When there is a risk that the device has been damaged NEVER try to repair the device
6. Do not use the device with wet hands.
6
