Bedienungsanleitung Camry CR 7739 (Seite 7 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

802399

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

II. WARNINGS

1. Never use the device if it is damaged or does not function properly.

2. Never use the device if it has fallen from a height before and shows visible signs of

damage.

3. Do not use extension cords or other electrical outlets that do not meet the applicable

standards and electrical regulations.

4. Any repairs, dismantling or replacement of any parts should always be made by a

specialized facility.

5. If the device and elements such as electrical contacts are wet, the plug or cable

should be dried before using the device and its components.

6. Do not use the device with wet hands.

7. When there is a risk that the device has been damaged NEVER try to repair the

device yourself.

8. Never wash the device under running water or in such a way that water drips into it.

9. Do not use accessories that are not recommended by the manufacturer. They may

pose a danger to the user and may cause damage to the device.

10. Ensure that the device has cooled down before storing.

11. Do not touch the housing during use. During operation, use only knobs and

switches. After switching off, wait for the device to cool down.

12. CAUTION: Some parts of this device may become very hot during operation and

cause burns.

III. BEFORE FIRST USE

1. Remove all packing material and straighten the power cord.

2. During installation, in no case may the device be covered with insulating material or similar material.

3. Before first use read all instructions for use.

4. Do not use the device unless the feet are correctly attached

5. Keep the mains lead away from the hot body of the device.

6. Do not use outdoors.

7. Do not place any objects close to the outlet grills or the air intake openings of the device when operating.

8. Do not place the device on carpets having a very high hairs.

9. Always ensure that the device is placed on a firm level surface. Ensure that the device is not positioned close to curtains or

furniture as this could create a fire hazard.

10. Do not position the device in front of, or immediately below, a wall socket.

11. Do not position the under the window.

12. Do not insert any object through the heater outlet or air intake grills of the device.

13. Do not use the device in areas where flammable liquids are stored or where flammable fumes may be present.

14. Always unplug the device when moving it from one location to another.

INSTALLATION IN STANDING POSITION ON THE FLOOR

Before using the device, the feet (supplied separately in the carton), must be fitted to the device. These are to the base of the heater

using the 4 self-tapping screws provided. Take your care to ensure that they are located correctly in the bottom ends of the device

side moldings.

PRODUCT DESCRIPTION: CONVECTION HEATER WITH REMOTE CONTROL

1. Power switch 2. Air outlet grid 3. Air inlet grid

4. Feet 5. Housing 6. Control Panel LCD

7. Remote control 8. Fan’s ventilation grid

CONTROL PANEL

A. Power button B. Heat output button

C. TURBO FAN button D. Timer button 1-24 hours

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Camry CR 7739 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info