Bedienungsanleitung Candy CH64BVT (Seite 9 von 149) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

714059

Zoom out

Zoom in

Vorherige Seite

1/149

Nächste Seite

Child Lock option

Note: An automatic child lock will produce in 15 minutes after total

Switch OFF of the hob.

Then, any time when a key will be touched, displays will show "L"

during 2sec. heating remains at the same state.

This action will be done when ‘+’ & ‘-‘keys were touched at the same

time.

To deactivate Child Lock, follow the same process explained before.

Then Short beep will be heard and displays will show "n" letter. Hob will

remain unlocked.

Selecting a zone

When zone is already ON a lower lighting intensity for the not selected

zones that are ON is produced.

If only one zone is ON, this zone is already selected by default, without

needing to short press (150 msec) over selection key.

Increase / Decrease power level

1. For Long Presses in + or - keys, power level increases /decreases

continuously. With a fast increase, power stops at level 9, and for a

higher power another short press is needed on the + key. No beep

sound is heard with fast increase / decrease.

2. Once arrived to P power level, pressing + key again does not

change power level to 0.Once arrived to 0 power level, pressing - key

again does not change power level to P.

With a short press on ‘+’ or ‘-‘ keys, Increase or decrease power in the

selected zones digit: 0-1-2-3...9-P

3. With a zone ON at 0 power level, if the zone is hot, 0 will blink

alternatively.After 10 seconds, 0 will disappear an ‘H’ letter will appear

fixed on display.

4. When a heater is selected and ‘+’ & ‘-‘keys are touched at the same

time, power level will go to ‘0’ but heater will maintain selected during

10 seconds. If heater was temporized, timer will go to Off. This action

can only be developed in several cases depending touch control

configuration.The following examples are for information only.

Personal experience should then let you adapt these settings to your

taste and habits.

To switch ON double extension ring, associated main zone must be

already ON and Indicating power level must be higher than 0.

8.1- Double zone ON

1st Short Press on extension key Switches ON extension ring. LED

over extension key turns ON if Extension ring is ON.

8.2- Triple zone ON

Short beep each press on extension key.

1st Short Press on extension key Switches ON 1st extension ring. 1

LED over extension key turns ON if 1st extension ring is ON (left LED

in case of triple zone, middle and only LED in case of double zone) 2nd

Short Press on extension key Switches ON 2nd extension ring.

2nd Short Press on extension key Switches OFF extension ring.

Double / Triple zones

Bridge function

Both bridge heater displays will show same power level.

Both bridge heaters will be selected at the same time.

The bridge can be enabled only when both heaters are off. One heater

of the bridge has been selected, to activate bridge function touch

bridge key.

Abeep sounds and the zone LED is switched on if the zone is enabled.

Once the heaters selected, if the power level is not the desired power

level, by the + - keys.

- If the bridge key is touched in setting mode

- If user selects power level “0”

The function will finish:

Overflow security

Something (an object or a liquid) is pressing any key during more than

5s. 2 Short Beep + 1 Long beep every 30s while the key is pressed.

Cook-top will turn Off. This symbol will maintain blinking while the

matter persist.

Timer

5) Maximum time 99 minutes.

7) It is possible to adjust the timer time while the timer is previously

running.

Timer function can be activated with its own key.

1) With "+" or "-" keys, timer time can be chosen. No Beeps at time

change.

2) Pressing continuously timer key, the timer is cancelled (goes to 00).

3) If timer "+" or "-" keys is maintained pressed there is quick setting.

4) When setting timer time, it is possible to go from "00" to "99" with "-"

key, and from "99" to "00" with "+" key.

8) Power of timed zone can be modified without consequences on the

timer programming.

10) Pressing the Timer key without any selected zone and when no

zone is being timed, does nothing.

11) Pressing the Timer key without any selected zone and when many

zones are being timed, the time shown in time digits changes in a

rotatory way, and shows the time whose power display has the

decimal point ON.

Select the zone to be timed. Power level of the zone greater than 0.

Static is displayed in the zone being timed . "0 0" in the digits

reserved for the timer.

12) Alternatively Power (5s) and (0,5s) is displayed in the zone being

timed.

Remaining time is displayed in the digits reserved for the timer. If

multiple zones are timed, the smallest remaining time is displayed,

and the decimal point is displayed in the corresponding zone.

9) Last minute will be displayed by seconds (For Variants only visible if

we enter the timer programming while the last minute of the

countdown)

6) When the time is elapsed and the hob is beeping, press any key and

the alarm and digit sequence will end.

2 LEDs over extension key turn ON if 1st and 2nd extension rings are

ON 3rd Short Press on extension key. Switches OFF 1st and 2nd

extension rings.

Short beep each press on extension key.

Residual Heat Indicator (In radiant heaters-> calculated)

The same indicators can be used for “residual heat” indication as well.

A time table must be defined on this purpose: Rest Heat time=f (power

level, working time).

To generate a temperature above 65 C a heating element has to be in

operation for certain time, this time depends on the power level. Once

this time has expired, the residual heat warning will be shown when

the heating element is switched off.

While a temperature on the cook top glass surface is above

65 Cb(theory value), this condition will be shown in the associated

display, by means of an “H”.

09 GB

Candy CH64BVT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info