Bedienungsanleitung Candy CH64BVT (Seite 10 von 149) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

714059

Zoom out

Zoom in

Vorherige Seite

1/149

Nächste Seite

Automatic Safety Off

If the power level is not changed during a preset time, the

corresponding heater turns off automatically.

The maximum time a heater can stay on, depends on the selected

cooking level.

Power level

Max. time on (hours)

NOTE: while an overheating situation should occur during the

operation of the highest power levels, the Hob control will

automatically adjust the power level in order to protect the hob from

overheating.

7. CLEANING AND MAINTENANCE

If there are still some stubborn stains:

NB:

.MAINTENANCE:

Frequent cleaning leaves a protective layer which is essential to

prevent scratches and wear. Make sure that the surface is clean

before using the hob again. To remove marks left by water, use a few

drops of white vinegar or lemon juice. Then wipe with absorbent paper

and a few drops of specialised cleaning fluid.

The glass ceramic surface will withstand scraping from flat-bottomed

cooking vessels, however, it is always better to lift them when moving

them from one zone to another.

. Before carrying out any maintenance work on the hob, allow it to

cool down.

- Wipe with a soft cloth or dry kitchen paper until the surface is clean.

. Avoid spillages, as anything which falls on to the hob surface will

quickly burn and will make cleaning more difficult.

Do not use a sponge which is too wet.

- Wipe with a soft cloth or dry kitchen paper until the surface is clean.

- Repeat the operation if necessary.

. It is advisable to keep away from the hob all substances which are

liable to melt, such as plastic items, sugar, or sugar-based products.

- Place a few more drops of specialised cleaning fluid on the surface.

- Place a few drops of the specialised cleaning product on the hob

surface.

- Scrape with a scraper, holding it at an angle of 30° to the hob, until

the stains disappear.

- Rub any stubborn stains with a soft cloth or with slightly damp

kitchen paper.

AFEW HINTS:

. Only products, (creams and scrapers) specifically designed for

aglass ceramic surfaces should be used. They are obtainable from

hardware stores.

Never use a knife or a screwdriver.

A scraper with a razor blade will not damage the surface, as long

as it is kept at an angle of 30°.

Never leave a scraper with a razor blade within the reach of

children.

Never use abrasive products or scouring powders.

. The metal surround : to safely clean the metal surround wash with

soap and water, rinse, then dry with a soft cloth.

10 GB

30° Maxi

Any change in the colour of the glass-ceramic surface does

not affect its operation or the stability of the surface. Such

discolorations are mostly a result of burnt food residues or

use of cookware made of materials such as aluminium or

copper; these stains are difficult to remove.

8. PROBLEM SOLVING

Only use flat-bottomed pans. If light is visible between the pan and the

hob, the zone is not transmitting heat correctly.

Light surfaces on the hob

The cooking is too slow

Use a razor blade and follow the "CLEANING" section.

The pan bottom should fully cover the diameter of the selected zone.

Small scratches or abrasions on the hob's glass surface

Dark stains

The cooktop is not working.

Metal marks

Refer to the "CLEANING" section.

You use the correct materials, but the stains persist.

Marks from an aluminium or copper pan, but also mineral, water or

food deposits; they can be removed using the cream cleaner.

as the cooking zone.

Incorrect cleaning or rough-bottomed pans are used; particles like

grains of sand or salt get between the hob and the bottom of the pan.

Refer to the "CLEANING" section; make sure that pan bottoms are

clean before use and only use smooth bottomed pans. Scratches can

be lessened only the cleaning is done correctly.

Have a check made that the connection is done he control panel is

locked. Unlock the hob.

The hob does not operate or certain zones don't work

The control panel is locked. Unlock the hob.

The cooking zones do not simmer or only fry gently

Do not slide aluminium pans on the hob. Refer to the cleaning

recommendations.

Use a razor blade and follow the "CLEANING" section.

Unsuitable pans are being used. Only use flatbottomed utensils, that

are heavy and have a diameter at least the same

Caramelisation or melted plastic on the hob.

The shunts are not positioned correctly on the terminal board.

The hob does not cut off.

Frequency of on/off operations for cooking zones

The on-off cycles vary according to the required heat level:

- low level: short operating time,

- high level: long operating time.

The cooktop has turned itself off.

Display F and numbers

If and numbers appears in the display, your unit has detected a fault.

The following table list actions you can take to correct the problem.

Check the condition of the fuses / circuit breakers at your

location.Check to see if you are experiencing a power failure.

The main switch (ON/OFF key) was accidentally touched or there is

any object above any key. Turn the unit on again without any object

about the keyboard. Enter your settings again.

9. AFTERCARE

Before calling out a Service Engineer please check the

following:

— that the plug is correctly inserted and fused;

If the fault cannot be identified switch off the appliance — do not

tamper with it — call the Aftercare Service Centre. The appliance is

supplied with a guarantee certificate that ensures that it will be

repaired free of charge at the Service Centre.

Candy CH64BVT Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info