Bedienungsanleitung Candy FNP 827 (Seite 10 von 50) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

466089

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

The first operation to carry out after the oven

has been installed or following the interruption

of power supply (this is recognizable the display

pulsating and showing 12:00) is setting the

correct time.

• Turn the selector knob (1)

to the symbol.

• Using the and buttons,

set the time of day (while

setting, the numbers on

the display will flash)

• When knob (1) is turned

to the symbol, the light

comes on

USE OF THE PROGRAMMER

FUNCTION HOW TO ACTIVATE IT HOW TO SWITCH IT OFF WHAT IT DOES WAT IT IS FOR

• This function is useful for

checking that the oven is

fully operational.

• Using the and buttons,

set the time of day (while

setting, the numbers on the

display will flash)

NB: Set the clock imme-

diately after installing the

appliance or after an inter-

ruption to the power sup-

ply (this is shown by 12:00

flashing on the display).

• Turn the selector knob to

the position

• Allows you to regulate the

time shown on the oven

clock

OVEN

LIGH

CLOCK

THE PROGRAMMER

Clock display Safety display

Control buttons

Programmer function

display

A slight delay will occour when setting a programme, while the

oven carries out internal diagnostics.

9 GB

• This function is used typi-

cally used with ‘cooking

time’ function. For example

if the dish has to be

cooked for 45 minutes and

needs to be ready by

12:30, simply select the

required function, set the

cooking time to 45 minutes

and the end of cooking

time to 12:30.

Cooking will start automa-

tically at 11:45 (12:30

minus 45 mins) and

will continue until the pre-

set end-of-cooking-time,

when the oven will switch

itself off automatically.

• Select a cooking func-

tion (selector knob 2)

• Turn the selector knob to

the symbol.

• Set the end of cooking time

using the and buttons

(while setting, the numbers

on the display will flash)

• At the pre-set time the oven

automatically switches

itself off. If you need to stop

it before then, switch the

oven off by turning the

selector knob 2 to the

symbol.

• Allows the end of cooking

time to be stored in the

memory.

• When the cooking time has

been set, turn selector

knob 1 to the symbol to

display the time of day.

• To display the programmed

time turn selector knob 1

to the symbol.

END OF

COOKING

ALARM

• Provides an audible alarm

signal (for a few seconds)

at the end of cooking time.

• Useful as a reminder

• This function works

independently of the

oven (it can be used

even when the oven is

not working)

• To select a cooking fun-

ction use (selector knob 2)

• Turn selector knob 1 to the

symbol

• Set the cooking time using

the and buttons (while

setting, the numbers on

the display will flash)

• When the cooking time is

up, the oven will switch it

self off.

If you need to stop it before

then, the oven must be

switched off, or the cooking

time must be turned to 00:00.

(selector 1 to symbol ,

and use the and

buttons)

• Allows the end of cooking

time to be stored in the

memory.

• When the cooking time

has been set, turn selector

knob 1 to the symbol

to display the time of day.

• To display the programmed

time turn selector knob 1

to the symbol.

• When the set cooking time

is up the oven switches

itself off automatically and

for a few seconds an alarm

sounds.

COOKING

TIME

CHILD

SAFETY

• Press buttons and

together for three seconds.

The light flashes.

• The oven settings cannot

be altered (even when the

knobs are accidentally

adjusted)

• Operates even when the

oven is not on preventing

it from being inadvertently

switched on.

• Is operational when the

oven is on and prevents

any alterations to the

settings (through acciden-

tal turning of the knobs)

NB: the oven can still be

switched off by turning se-

lector knob 2 to position 0.

• Turn selector knob 1 to the

symbol.

• Set the cooking time using

the and buttons (while

setting, the numbers on

the display will flash)

• When the set cooking time

is up, the oven will auto-

matically switch itself off. If

you need to stop it before

then, you must turn the set

time to 0 (selector knob 1

on and then use the

and buttons)

• Turn the selector knob 1

to the symbol. The

indicator light will flash.

• Press the and buttons

at the same time, for three

seconds.

• The setting is confirmed

when the light stops

flashing.

WARNING:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Candy FNP 827 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info