Bedienungsanleitung Cannondale 2011 (Seite 36 von 106) (Englisch)

624614

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

34 35

PART I

(continued from previous page...)

They only engage or disengage with a very specic

motion which must be practiced until it becomes

instinctive. Clipless pedals require shoes and cleats

which are compatible with the make and model

pedal being used.

Many clipless pedals are designed to allow the rider

to adjust the amount of force needed to engage or

disengage the foot. Follow the pedal manufacturer’s

instructions, or ask your dealer to show you how to

make this adjustment. Use the easiest setting until

engaging and disengaging becomes a reex action,

but always make sure that there is sucient tension

to prevent unintended release of your foot from the

pedal.

WARNING

CLIPLESS PEDALS ARE INTENDED FOR USE

WITH SHOES SPECIFICALLY MADE TO FIT THEM

AND ARE DESIGNED TO FIRMLY KEEP THE

FOOT ENGAGED WITH THE PEDAL.

DO NOT USE SHOES WHICH DO NOT ENGAGE

THE PEDALS CORRECTLY.

Practice is required to learn to engage and

disengage the foot safely. Until engaging and

disengaging the foot becomes a reex action, the

technique requires concentration which can distract

your attention and cause you to lose control and

fall. Practice engaging and disengaging clipless

pedals in a place where there are no obstacles,

hazards or trac; and be sure to follow the pedal

manufacturer’s setup and service instructions. If

you do not have the manufacturer’s instructions, see

your dealer or contact the manufacturer.

4.F - BICYCLE SUSPENSION

Many bicycles are equipped with suspension

systems. There are many dierent types of

suspension systems — too many to deal with

individually in this Manual. If your bicycle has a

suspension system of any kind, be sure to read

and follow the suspension manufacturer’s setup

and service instructions. If you do not have the

manufacturer’s instructions, see your dealer or

contact the manufacturer.

WARNING

FAILURE TO MAINTAIN, CHECK AND PROPERLY

ADJUST THE SUSPENSION SYSTEM MAY

RESULT IN SUSPENSION MALFUNCTION,

WHICH MAY CAUSE YOU TO LOSE CONTROL

AND FALL.

If your bike has suspension, the increased speed you

may develop also increases your risk of injury. For

example, when braking, the front of a suspended

bike dips. You could lose control and fall if you do not

have experience with this system. Learn to handle

your suspension system safely. See also SECTION

4.C.

WARNING

CHANGING SUSPENSION ADJUSTMENT CAN

CHANGE THE HANDLING AND BRAKING

CHARACTERISTICS OF YOUR BICYCLE.

Never change suspension adjustment unless

you are thoroughly familiar with the suspension

system manufacturer’s instructions and

recommendations, and always check for changes

in the handling and braking characteristics of the

bicycle after a suspension adjustment by taking

a careful test ride in a hazard-free area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cannondale 2011 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cannondale 2011

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info