Bedienungsanleitung Cannondale Topstone Neo Carbon 2020 (Seite 18 von 20) (Englisch)

804892

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Topstone Neo Carbon OMS

EBike Maintenance

Before and After Each Ride:

EBike Maintenance

Maintaining Your Bike

138222 Rev 1 (03/20)

EBIKE MAINTENANCE

Perform a pre-ride-check before and after each ride. Frequent checks are necessary to identify

and correct problems that can lead to an accident. Do not ride your bike if it does not operate

normally or has broken, damaged, or missing parts. Have any damage inspected and repaired by

your Cannondale Dealer before riding again.

You can be severely injured, paralyzed or killed in an accident if you ignore this warning.

Maintaining Your Bike

1. Read your Cannondale Bicycle Owner’s

Manual for information on an owner’s

reposnsibility for the routine/ basic

inspection and maintenance of your bike.

Consult with your Authorized Cannonda-

le Dealer to create a complete main-

tenance program for your riding style,

components, and conditions of use.

Follow the maintenance recommendati-

ons given by the component manufactu-

rer’s for the various parts of your bike.

2. Recommended after the ﬁrst 150 km,

bring your bike to your Authorized Can-

nondale Dealer for an initial check-up. It

should include checks of the drive-assist

system, drive chain condition, proper

shifting, accessories, wheels and tire

condition, brakes, etc. This visit will help

you establish a schedule for repeated

visits appropriate for how and where you

ride.

3. Every 1000 km, bring your bike in to

your Authorized Cannondale Dealer for a

regular detailed inspection, adjustment,

and replacement of wear items across

the entire bike. Electrically powered-as-

sist cycle (electric bikes) can wear out

wheels, tires, drive chain, brakes, more

quickly.

Maintaining Your Bike’s

Drive System

NOTICE

Drive-assist system components must

only be serviced at an authorized service

center. This will ensure the quality and

safety of the drive-assist system.

Never attempt to open, remove drive

system parts from the frame, or work

on them yourself. Other components

of the electric bicycle drive (e.g. drive

chain, front chain ring, rear cassette, rear

derailleur, crank arm) must be serviced by

an Authorized Cannondale Dealer.

Replacement parts must be identical to

the original Cannondale speciﬁcation for

the bike. Failure to replace components

with original speciﬁcation can result in

serious overload or other damage to the

drive unit.

Unauthorized opening or service of the

drive unit will void the warranty.

Before and After Each Ride:

• Clean and visually inspect the entire bike for cracks or damage. See “Inspect for

Safety” in your Cannondale Bicycle Owner’s Manual.”

• Make sure the battery is fully charged and mounted securely. Follow the drive system

charging instructions. Battery charge discharge capacity will decline with usage.

Have older battery replaced when is fails to charge within the time indicated, and/or to

provide power reliably.

• Test the drive-assist system, make sure the drive system functions normally.

• If your EBike model was equipped a lighting system, brake lights, headlights, tailights

and number plate illumination, make sure these lights are each functioning normally.

Make sure the number plate is clean and readable.

• Check the front and rear brake conditions, make sure they function normally.

• Check tire pressure and wheel conditions. Check tire pressure and the condition of

the wheels. Ensure the tires are not damaged and do not have excessive wear. Ensure

there are no broken or missing wheel parts and that the wheels are ﬁrmly attached via

secured skewers/axles.

• Conﬁrm the drive chain condition is in good condition, is clean and well-lubricated.

Chain wear is greater compared with pedal only bikes. This requires frequent inspection

and replacement. Ensure the gears operate normally through the entire range.

• Check the bicycle brakes. Make sure they are working well. Brake system pad and disc

wear is greater compared with pedal only bikes. This requires frequent inspection and

replacement.

• Inspect condition of electrical cables (i.e. Kinks free, no signs of abrasive wear). Check

cable at dropout end when assembled properly will prevent cable from contacting brake

rotor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cannondale Topstone Neo Carbon 2020 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cannondale Topstone Neo Carbon 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info