Bedienungsanleitung Canon EOS R5 C (Seite 107 von 254) (Englisch)

809437

107

Zoom out

Zoom in

Vorherige Seite

1/254

Nächste Seite

107

Recording Audio

Adjusting the Audio Recording Level

You can adjust the audio recording level of the DM-E1D Directional Stereo Microphone or the MIC terminal. You

can set each audio channel separately or set CH1/CH2* or CH3/CH4* together to automatic or manual.

* When [CH1/CH2 ALC Link]/[CH3/CH4 ALC Link] is set to [Linked].

Audio Level Adjustment for CH1, CH2 or CH1/CH2

1 Select > [

Audio Setup] > [Audio Rec Level CH1], [Audio Rec Level CH2] or [Audio Rec Level CH1/

CH2] > [Automatic] or [Manual].

• The following procedures are not necessary if set to [Automatic].

2Select > [

Audio Setup] > [CH1 Level], [CH2 Level] or [CH1/CH2 Level] > Adjust the audio level as

needed.

• For reference, 0 corresponds to – , 50 corresponds to 0 dB, and 100 corresponds to +18 dB.

• As a guideline, adjust the audio recording level so that the audio level meter on the screen will go to the right

of the –18 dB mark (one mark right of the –20 dB mark) only occasionally.

Audio Level Adjustment for CH3, CH4 or CH3/CH4

1 Select > [

Audio Setup] > [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/

CH4] > [Automatic] or [Manual].

• If you selected [Automatic], the rest of the procedure is not necessary. If you selected [Manual], continue the

procedure to set the audio recording level.

2Select > [

Audio Setup] > [CH3 Level], [CH4 Level] or [CH3/CH4 Level] > Adjust the audio level as

needed.

• For reference, 0 corresponds to – , 50 corresponds to 0 dB, and 100 corresponds to +18 dB.

• As a guideline, adjust the audio recording level so that the audio level meter on the screen will go to the right

of the –18 dB mark (one mark right of the –20 dB mark) only occasionally.

NOTES

• We recommend using headphones when adjusting the audio level. If the input level is too high, audio may

become distorted even if the audio level indicator shows an appropriate level.

• If you set an assignable button to [Audio Level Indicator] (A125), you can press the button to turn the

onscreen audio level indicator on and off.

Advanced Audio Input Settings

You can adjust the audio input settings for the DM-E1D Directional Stereo Microphone or the MIC terminal. The

corresponding menu settings become available only when the respective audio input is active.

Microphone Attenuator (MIC Terminal)

You can activate the microphone attenuator for an external microphone (20 dB).

Select > [

Audio Setup] > [MIC Att.] > [On].

Linking the audio level adjustment of CH1/CH2 or CH3/CH4 (MIC terminal)

• When using the MIC terminal, you can use the > [

Audio Setup] > [CH1/CH2 ALC Link] or [CH3/

CH4 ALC Link] setting to link the audio level adjustment of CH1/CH2 or CH3/CH4.

• When linked, different channels can be adjusted together. Adjust the CH1 audio levels to affect both CH1

and CH2 or adjust the CH3 audio levels to affect both CH3 and CH4.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS R5 C Seite 107

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS R5 C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info