Bedienungsanleitung Canon EOS R5 C (Seite 181 von 254) (Englisch)

809437

181

Zoom out

Zoom in

Vorherige Seite

1/254

Nächste Seite

181

Browser Remote: Controlling the Camera from a Network Device

In CAMERA mode, you can operate the camera remotely using Browser Remote, an application that can be

accesses on a connected network device. Using Browser Remote you can check the camera’s live image and

control various recording settings*. You can also check other important indications, such as remaining recording

time on the card, remaining battery charge/power source details, time code, etc.

* White balance, ISO speed/gain, shutter speed, aperture, focus and zoom.

Starting Browser Remote

After connecting the camera to the network In CAMERA mode, you can start the Browser Remote application

on the Web browser* of any network device** connected to the same network.

* A Web browser that supports JavaScript and is enabled to accept cookies is required.

** For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website.

Preparations on the Camera

1 Connect the camera to the desired network and activate the network functions (A 164).

• Select a connection setting with the [Browser Remote] function setting.

2 Check the Browser Remote’s URL in the [ Network Settings] status screen (A210).

• When using IPv6 settings, check the camera’s IP address instead (A209).

• Write down the URL or IP address if necessary.

On the Network Device

1 Connect the network device to the camera or to the same access point as the camera.

2 Start the Web browser on the network device.

3 Enter Browser Remote’s URL.

• Enter the URL / IP address you checked previously into the Web browser’s address bar as follows.

• To use an HTTPS connection, enter "https:" instead of "http:".

• When using IPv6 settings, enter the camera's IPv6 IP address instead.

4 Enter the user name and password.

• Be sure to log in with the user name and password of one of the

users that were set on the camera (A168). If necessary, consult

the administrator who configured the camera’s settings.

• The Browser Remote screen will appear. The screen displayed may

be different depending on the user information used to log in.

5 To change the application’s language, select [ ] > [Language

] >

Desired language.

• Most buttons and controls emulate physical controls on the camera

and are labeled in English only, regardless of the language selected.

6 Use the Browser Remote controls to operate the camera.

• Descriptions of the controls are given in the following pages.

7 When you have finished using Browser Remote, select [ ] > [Log Out] on the Browser Remote screen to end

the application.

http://xxx.xxx.xxx.xxx:nnn

Camera’s IP address Port No. (can be omitted when using the default port no.)

Example of the login screen. The screen may

differ depending on the Web browser and

version used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS R5 C Seite 181

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS R5 C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info