Bedienungsanleitung Canon LV-X320 (Seite 9 von 80) (Englisch)

615747

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

Precautions for Installation

Pay attention to the following points regarding the power source, power plug and handling of the

connector. Failure to do so could result in a fire, electric shock or personal injury.

• Do not use any power source with a voltage other than the voltage indicated (AC 100 – 240 V).

• Do not pull the power cord and be sure to hold the power plug or connector when removing. The

cord could be damaged as a result.

• Do not insert any metal objects into the contact parts of the power plug or connector.

• Remove the power plug from the outlet before performing cleaning or maintenance of the projector.

• Do not remove the power plug or connector with wet hands.

• Insert the power plug and connector securely up to the base. Additionally, do not use a damaged

power plug or an outlet that is loose.

• If using an extension cord attached to the outlet, make sure that the total electric power consumption

of connected devices does not exceed the rated capacity.

• Periodically inspect the power plug and outlet and remove any dust or dirt from between the plug

and the outlet.

Warning

Pay attention to the following points regarding installation and handling of the projector. Failure to do

so may cause a fire, electric shock or personal injury.

• Do not use the projector in a bathroom or shower room.

• Do not use the projector in rain or snow, by the sea, or in close proximity to a body of water.

• Do not place containers containing a liquid on top of the projector.

• Do not place the projector in any location where it will be exposed to oily smoke or steam, such as a

kitchen work surface or table etc.

• Do not touch the projector itself, the power cord, or the cable if lightening strikes.

Pay attention to the following points regarding installation and handling of the projector. Failure to do

so may cause a fire, electric shock or personal injury.

• Do not move the projector until you have switched off the power, removed the power plug from the

power outlet and unplugged any other cables.

• Do not remove the cabinet from the projector or disassemble it. The interior of the projector

contains high-voltage components as well as parts that are hot. These could cause an electric shock

or burn. If inspection, maintenance or repair is required, contact the Canon Customer Support

Center.

• Do not disassemble or modify the projector (including consumable parts) or the remote control.

• Do not insert any object into vents in the projector, such as the air intake vent or exhaust vents.

• Do not place a pressurized can in front of the exhaust vents. The pressure of the contents of the can

may increase due to heat from the exhaust vents and this could result in an explosion.

• As strong light beams are emitted while the projector is in use, do not look directly into the projector

lens. Doing so could cause an eye injury. Pay particular attention in preventing young children to do

so.

• When giving a presentation in front of the projector while it is projecting an image, conduct your

presentation from a position where your shadow will not be cast on the screen and where you do not

feel blinded by light from the projector.

Warning

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LV-X320 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LV-X320

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info