Bedienungsanleitung Canon LV-X320 (Seite 10 von 80) (Englisch)

615747

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Precautions on the lamp

This projector uses a high-pressure mercury lamp, which must be handled carefully and correctly as

described below.

The mercury lamp has the following characteristics.

• Impact, abrasion, or use after the lamp’s useful life has expired may damage lamps (which may be

accompanied by a loud noise) or cause them to burn out.

• Useful life of lamps varies widely from lamp to lamp and depending on the environment of use.

Lamps are not guaranteed to last for the same amount of time, and some lamps may fail sooner than

others.

• The lamp will gradually become darker over time.

Pay attention to the following points regarding installation and handling of the projector.

• If the projector will not be used for a long period of time, be sure to remove the power plug from the

power outlet to ensure safety. Failure to do so could cause a fire.

•

The temperature of the cabinet around and above the exhaust vents can become hot during projector

operation.

Touching these areas during operation could cause burns to the hands.

Do not touch these areas. Doing so may cause burns. Pay particular attention in preventing young

children from touching these parts. Additionally, do not place any metal objects on these areas. Due

to the heat from the projector, doing so could cause an accident or personal injury.

Pay attention to the following points regarding installation and handling of the projector.

• Do not place any heavy objects on top of the projector or sit/stand on it. Pay particular attention to

prevent small children from doing so. The projector may be knocked over and this could result in

damage or a personal injury.

• Do not place the projector on an unstable or slanted surface. Doing so may cause the projector to

fall or be knocked over and could result in a personal injury.

• Do not place any objects in front of the lens while the projector is operating. Doing so could cause a

fire.

• When cleaning off dust or dirt from the projector lens etc., do not use any kind of spray that is

flammable. As the temperature of the lamp inside the projector is high, it could ignite, causing a

fire.

• If the projector is used for a long period of time, dust could accumulate inside the projector. This

could cause a fire or malfunction. It is recommended that periodic maintenance of the projector be

performed. For details of maintenance costs, contact the Canon Customer Support Center.

Caution

When replacing the lamp, or when the lamp is damaged, pay attention to the following points. Failure

to do so could result in an electric shock or personal injury.

• Be sure to remove the power plug from the power outlet before replacing the lamp.

• When the lamp is damaged, shards of glass may be scattered inside the projector. Contact the Canon

Customer Support Center for cleaning and inspection of the projector interior and lamp

replacement.

Warning

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LV-X320 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LV-X320

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info