Bedienungsanleitung Canon LX-MW500 (Seite 42 von 85) (Englisch)

709680

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

Useful functions available during a presentation

Selecting a image mode

The projector is preset with several predefined image modes so that

you can choose one to suit your operating environment and input

signal picture type.

To select a operation mode that suits your need, you can follow one of

the following steps.

•Press OK/IMAGE on the remote control or projector repeatedly

until your desired mode is selected.

• Go to the PICTURE > Image Mode menu and press / to

select a desired mode.

Image modes for different types of signals

The image modes available for different types of signals are listed below.

1. Presentation mode: Suitable for projecting images with a lot of text.

2. Standard mode: Suitable for projecting computer screens or colorful images (movies), etc.

3. sRGB mode: Suitable for projecting photos from a digital camera that supports sRGB. Compatible

with the sRGB standard.

4. Movie mode: Suitable for projecting colorful images (movies).

5. DICOM mode: Suitable for projecting medical images (movies).

This projector is not the display monitor for a medical image. It cannot be used for the radiological

image reading or medical examination.

6. User 1/User 2 mode: You can save image quality settings that you have made as a custom setting.

You can then select the saved settings as an image mode. See "Setting the User 1/User 2 mode" on

page 42 for details.

It determines whether the input signal is a PC signal or video signal and then automatically recalls

the image mode that was last selected for that signal.

Setting the User 1/User 2 mode

There are two user-definable modes if the current available image modes are not suitable for your need.

User 1 (Presentation mode based) is for PC sources, and User 2 (Standard mode based) is for Video

sources.

1. Press MENU to open the On-Screen Display (OSD) menu.

2. Go to the PICTURE > Image Mode menu.

3. Press / to select User 1 to User 2.

4. Press to select a sub-menu item to be changed and adjust the value with / . See "Fine-tuning

the image quality in user modes" below for details.

5. The settings will be stored automatically.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available when User 1 or

User 2 mode is selected. You can make adjustments to these functions based on your needs.

Adjusting Brightness

Highlight Brightness in the PICTURE menu and adjust the values by pressing / on the projector or

remote control.

The higher the value, the brighter the image. And lower the setting,

darker the image. Adjust this control so the black areas of the image

appear just as black and that detail in the dark areas is visible.

Adjusting Contrast

Highlight Contrast in the PICTURE menu and adjust the values by pressing / on the projector or

remote control.

+50

+30

+70

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LX-MW500 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LX-MW500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info