Bedienungsanleitung Canon LX-MW500 (Seite 44 von 85) (Englisch)

709680

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

supplier should be able to provide you with suitable guidance, or even an experienced professional

installer.

The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you select each

color, you can independently adjust its range and saturation according to your preference.

If you have purchased a test disc which contains various color test patterns and can be used to test the

color presentation on monitors, TVs, projectors, etc. You can project any image from the disc on the

screen and enter the 6-axis Color Adjust menu to make adjustments.

To adjust the settings:

1. Go to the PICTURE menu and highlight 6-axis Color Adjust.

2. Press OK/IMAGE and the 6-axis Color Adjust page is displayed.

3. Highlight Select Color and press / to select a color from among Red, Green, Blue, Cyan,

Magenta, or Yellow.

4. Press to highlight Hue and press / to select its range. Increase in the range will include colors

consisted of more proportions of its two adjacent colors.

Please refer to the illustration to the right for how the colors relate

to each other.

For example, if you select Red and set its range at 0, only pure red

in the projected picture will be selected. Increasing its range will

include red close to yellow and red close to magenta.

5. Press to highlight Saturation and adjust its values to your

preference by pressing / . Every adjustment made will reflect

to the image immediately.

For example, if you select Red and set its value at 0, only the

saturation of pure red will be affected.

6. Press to highlight Brightness and adjust its values to your

preference by pressing / . The brightness level of the primary color you select will be affected.

Every adjustment made will reflect to the image immediately.

7. Repeat steps 3 to 6 for other color adjustments.

8. Make sure you have made all of the desired adjustments.

9. Press MENU to exit and save the settings.

Saturation is the amount of that color in a video picture. Lower settings produce less saturated

colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that

color will be overpowering and unrealistic.

Using Screen Color

In the situation where you are projecting onto a colored surface such as a painted wall which may not be

white, the Screen Color feature can help correct the projected picture’s color to prevent possible color

difference between the source and projected pictures.

To use this function, go to the DISPLAY > Screen Color menu and press / to select a color which is

the closest to the color of the projection surface. There are several precalibrated colors to choose from:

Light Yellow, Pink, Light Green, Blue, and Blackboard.

RED

BLUE

GREEN

Yellow

CyanMagenta

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LX-MW500 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LX-MW500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info