Bedienungsanleitung Canon LX-MW500 (Seite 45 von 85) (Englisch)

709680

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

ENGLISH

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you achieve better time

management when giving presentations. Follow these steps to utilize this function:

1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press OK/IMAGE to display

the Presentation Timer page.

2. Press to highlight Preset Time and decide the timer period by pressing / . The length of time

can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-minute increments.

If the timer is already on, the timer will restart whenever the Preset Time is reset.

3. Press to highlight Timer Display and choose if you want the timer to show up on the screen by

pressing

/ .

4. Press to highlight Position and set the timer position by pressing / .The reminder position can

be chosen from the upper-left, lower-left, upper-right to the lower-right corner of the screen.

5. Press to highlight Counting Direction and select your desired counting direction by pressing /

6. Press to highlight Sound Reminder and decide if you want to activate sound reminder by

pressing / . If you select On, a double beep sound will be heard at the last 30 seconds of counting

down/up, and a triple beep sound will be produced when the timer is up.

7. To activate the presentation timer, press and press / to select On and press OK/IMAGE.

8. A confirmation message is displayed. Highlight Yes and press OK/IMAGE to confirm. You will see

the message "Timer is On!" appearing on the screen. The timer starts counting once the timer is

turned on.

If you switch input signal or press AUTO PC when the timer is on, the timer will be stopped.

To cancel the timer, perform the following steps.

1. Go back to the Presentation Timer page.

2. Press and press / to highlight Off and press OK/IMAGE. A confirmation message is

displayed.

3. Highlight Yes and press OK/IMAGE to confirm. You will see the message ‚"Timer is Off!"

appearing on the screen.

Using the TIMER key

TIMER is a multi-functional key.

• If the presentation timer is off, pressing this key displays a

confirmation message. You can decide whether to activate the timer

or not by following the on-screen instruction.

• If the timer is already on, pressing this key displays a confirmation

message. You can decide whether to restart, continue or turn off the

timer by following the on-screen instruction.

Selection Description

Always Displays the timer on screen throughout the presentation time.

1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).

Never Hides the timer throughout the presentation time.

Selection Description

Count Up Increases from 1 to the preset time.

Count Down Decrease from the preset time to 1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LX-MW500 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LX-MW500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info