Bedienungsanleitung Canon Pixma IP 4000 (Seite 83 von 100) (Englisch)

34843

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Troubleshooting

“Error No.: 300” *

Printer is not ready Ensure that the P

OWER lamp lights green.

If the P

OWER lamp is off, turn the printer on.

The P

OWER lamp will flash green when the printer is initializing. Wait until the

POWER lamp stops flashing.

When the P

OWER lamp is flashing orange, an error may occur in the printer. For

details on how to resolve the error, refer to “H

andling Error Messages” on page

75.

Printer is not

properly connected

Ensure that the printer is securely connected to the computer.

z If using a switching hub or other device, disconnect the printer

and reconnect it directly to the computer and try printing again.

If successful, the problem may have been with the device.

z There could also be a problem with the cable(s). Replace the

cable(s) and try printing again.

Specified printer

name is not on the

print list under

Printer Setup Utility

rint Center)

1. Select Application from the G

o menu.

2. Double-click P

rinter Setup Utility in the U

tility folder.

When using versions of Mac OS other than Mac OS X v.10.3.x, double-click

the P

rint Center icon.

3. Ensure that the name of your printer is indicated in the printer list.

If the name of your printer does not appear in the printer list, carefully follow

the procedures described in the

Easy Setup Instructions

and reinstall the

driver.

“Error No.: 1700”*

Waste ink absorber

almost full

The printer has a built-in waste ink absorber to hold the ink used during print

head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the R

ESUME/CANCEL button to clear the error so you can continue

printing. Before the waste ink absorber becomes completely full, contact the

Customer Care Center.

“Error No.: 1851”*

Inner Cover is open

when printing

starts

Close the Inner Cover, then press the R

ESUME/CANCEL button.

“Error No.: 1856”*

Inner Cover is

opened while

printing

Close the Inner Cover, then press the R

ESUME/CANCEL button. Try printing

again.

“Error No.: 2001”*

A specified period

of time has elapsed

without receiving a

response from the

digital camera/The

digital camera or

digital video

camcorder

connected is not

compatible with

this printer

Disconnect the camera cable, press the R

ESUME/CANCEL button on the printer

and reconnect the cable.

If the error is still unresolved, there is a possibility that you are using a digital

camera or digital video camcorder that is not supported by this printer. Use a

digital camera or digital video camcorder compatible with this printer.

“Error No.: 2500”*

Automatic Print

Head alignment

failed

See “Eleven flashes” in “H

andling Error Messages” on page 75.

* When using Mac OS 9.x, a character is displayed before the error number.

Problem Possible Cause Try This

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Pixma IP 4000 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Pixma IP 4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info