Bedienungsanleitung Canon Pixma MP 990 series (Seite 1057 von 1086) (Englisch)

542776

1057

Zoom out

Zoom in

Vorherige Seite

1/1086

Nächste Seite

point and the machine.

The Machine Cannot Be Detected in the Network

Check 1: Make sure that the machine is turned on.

Check 2: Make sure that the USB cable is connected properly.

Refer to the setup manual of the machine to connect the USB cable properly.

Check 3: Make sure that the machine setup is completed.

If not, refer to your setup manual of the machine to complete the machine setup.

Check 4: When using wired LAN, make sure that the LAN cable is connected

properly.

Check 5: When using Canon IJ Network Tool, click Update to search for the

printer again.

Canon IJ Network Tool Dialog Box

Check 6: When searching for a printer over a network, make sure that the

machine is associated with the port driver.

When No Driver is displayed under Name in the Canon IJ Network Tool, there is no

association. Select Associate Port on the Settings menu, then associate the port with the

printer.

Canon IJ Network Tool Menus

Check 7: When using wireless LAN, make sure that the network settings in the

printer are identical with those of the access point.

Refer to the manual provided with the access point or contact its manufacturer to check the

access point settings, and then modify the machine settings.

How to Set a WEP/WPA/WPA2 Key

Check 8: When using wireless LAN, make sure that there is no obstruction.

Wireless communication between different rooms or floors is generally poor. Adjust the

location of the devices.

Check 9: When using wireless LAN, make sure that the machine is not place as

far away from the access point.

The access point is located indoors within the effective range for wireless communication.

Locate the machine within 50 m from the access point.

Check 10: When using wireless LAN, make sure that there is no source of radio

wave interference in your vicinity.

There may be a device such as a microwave oven using the same frequency bandwidth as

the wireless station. Place the wireless devices as far away from the interference source as

possible.

Check 11: Make sure that the network settings of the computer are correct.

Make sure that the computer can communicate with the printer and the access point over the

wireless LAN.

Check 12: Make sure that Enable bidirectional support is selected in the Ports

sheet of the properties dialog box of the printer driver.

Opening the Printer Properties Dialog Box (Windows)

Check 13: Make sure that the firewall of the security software is disabled.

If the firewall function of your security software is turned on, a message may appear warning

that Canon software is attempting to access the network. If the warning message appears,

Page 1057 of 1086 pagesCannot Communicate With the Machine/Cannot Print from the Machine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Pixma MP 990 series Seite 1057

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Pixma MP 990 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info