Bedienungsanleitung Canon S200 (Seite 46 von 56) (Englisch)

19958

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Appendix

Safety Information

Warnings and Cautions

This guide uses the following icons to indicate situations that could cause damage or injury:

Always follow the instructions provided in Warnings to prevent potential or serious

personal injury or death as a result of careless operation of the equipment.

Always follow the instructions provided in Cautions to prevent minor injuries to yourself

or damage to the equipment as a result of careless operation of the equipment.

Read and follow all of these cautions and warnings to ensure the safe use of the printer. To avoid the hazards of

ﬁre, personal injury, or damage to the printer, never attempt to use the printer in any way other than the

methods described in this guide.

Choosing a Location

Never place the printer near ﬂammable solvents such as alcohol, thinner, etc. To avoid

the hazards of ﬁre or electric shock, keep all ﬂammable liquids away from the printer.

• Never set the printer on a surface that is unstable or subject to excessive vibration. The printer could tip or fall

and cause injury.

• Never use the printer in a location that is subject to high humidity, dust, high temperatures, or direct

sunlight.

• Set up and use the printer in a location where ambient temperature is within 41°F–95°F (5°C–35°C) and

10%–90% humidity with no condensation.

Never place the printer on a thick carpet or rug. Fibers or dust entering the printer could

cause a ﬁre.

Keep the power outlet for the printer free of all obstacles so you can unplug the power

cord at any time. Such obstacles could prevent you from unplugging the printer when a

printer fault occurs and cause a ﬁre or electric shock. The socket-outlet shall be installed

near the equipment and shall be easily accessible.

• Always carry the printer with both hands holding both ends of the printer. To avoid dropping the printer and

causing injury, always carry it carefully when moving it to another location.

Power Supply

Never attempt to plug the power cord into a power outlet when your hands are wet. To

avoid electric shock, make sure that your hands are dry.

• Always push the plug completely into the power outlet. A loose or poorly connected plug could cause a ﬁre or

electric shock.

Never cut, modify, stretch, bend, or twist the power cord, and never place heavy objects

on the power cord. A power leak from a damaged power cord could cause a ﬁre or electric

shock.

Never plug the printer power cord into a power outlet (power board, double adapter, etc.)

that is shared by other devices or ofﬁce equipment. To prevent the hazards of ﬁre or

electric shock, avoid overloading power points.

• Never use the printer if the power cord is bundled or knotted. To prevent the hazards of ﬁre or electric shock,

make sure the power cord is straight.

S200 QS.book Page 42 Tuesday, September 18, 2001 9:02 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon S200 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info