Bedienungsanleitung Canon S200 (Seite 47 von 56) (Englisch)

19958

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Appendix

If you detect smoke, unusual odors, or strange noises around the printer, immediately

unplug the printer. To avoid ﬁre or electric shock, never use the printer under these

conditions. Call the Customer Care Center.

• Always grasp the plug when you unplug the power cord. Pulling on the power cord could damage the cord and

cause a ﬁre or electric shock.

Never use an extension cord. To avoid a ﬁre or electric shock, always plug the power cord

directly into the power outlet.

Never use a power supply voltage other than that supplied in the country where you

purchased the printer. Using incorrect voltage could cause a ﬁre or electric shock. The

correct power supply voltage for this printer is AC 120V, 60 Hz.

Cleaning and Maintaining the Printer

Use only a slightly damp cloth to clean the printer. Never use ﬂammable solvents like

alcohol, benzene, thinner, etc. If a ﬂammable solvent contacts an electrical component

inside the printer, a ﬁre or electric shock could result.

Always unplug the printer power cord before you clean the printer. If you mistakenly turn

on the printer while cleaning it, you could touch moving components inside the printer

and suffer injury.

Never attempt to disassemble or modify the printer. The printer contains high voltage

components which could cause a ﬁre or serious electric shock.

Working Around the Printer

Never use ﬂammable sprays near the printer. Gases in the spray could cause a ﬁre or

electric shock if they come in contact with electrical components inside the printer.

Never insert your ﬁngers or hands inside the printer while it is printing. The printer

contains moving parts which could cause injury.

Never place anything on top of the printer, especially metal objects (paper clips, staples,

etc.), or containers with ﬂammable solvents (alcohol, thinners, etc.). Objects falling into

the printer could cause a ﬁre or electric shock.

If any foreign object, especially a piece of metal or liquid, falls into the printer,

immediately unplug the printer, then call the Customer Care Center. Continuing to use

the printer after a foreign object has fallen into it could cause a ﬁre or electric shock.

Printhead and Ink Tanks

For safety, always store printhead and ink tanks out of the reach of small children. If a

child accidentally licks or ingests any ink, consult a physician immediately.

Never subject a printhead or ink tank to shocks or excessive vibration. Shaking could

cause ink to leak and stain clothing.

Never touch the printhead or electrical contacts on a printhead immediately after

removing it from the printer. These metal parts become very hot during printing and

could cause minor burns.

Using the Printer Near Appliances and Fluorescent Lamps

• Allow at least 6 inches clearance between the printer and another appliance or a ﬂuorescent lamp. Electrical

noise generated by a ﬂuorescent lamp placed too close to the printer could cause the printer to malfunction.

S200 QS.book Page 43 Tuesday, September 18, 2001 9:02 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon S200 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info