Bedienungsanleitung Canon VB-H610VE (Seite 52 von 178) (Englisch)

683281

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

[Average]

The entire screen is metered by averaging.

A stable exposure can be achieved even in a

capture environment where there are notable

brightness differences within the screen.

Use this mode to stabilize the exposure in locations

where vehicles or people are moving.

[Spot]

The center of the screen is metered.

An appropriate exposure can be achieved for the

subject at the center of the screen regardless of the

brightness/darkness on the periphery of the screen.

Use this mode if you want to adjust the exposure to

the center of the screen because the subject is

receiving a spotlight or backlight, etc.

(4) [Focus Mode]

Set the focus mode when camera starts.

[Auto]

Automatically brings the subject into focus. Normally

[Auto] is selected.

[Fixed at infinity]

The focus can be fixed to near infinity.

(5) [Smart Shade Control]

Select [Disable] or one of the 7 levels from [1 (Mild)] to

[7 (Strong)] for smart shade control at the camera

startup.

(6) [White Balance]

Select the white balance according to the light source

to achieve natural color in the image.

[Auto]

The white balance is adjusted automatically.

[Manual]

Set the values of red and blue gain according to the

light source. Enter a value from 0 to 1023 for both

the [R Gain] and [B Gain].

[Daylight Fluorescent]

Select this option to capture video under daylight

fluorescent lighting.

[White Fluorescent]

Select this option to capture video under daylight

fluorescent or white fluorescent lighting.

[Warm Fluorescent]

Select this option to capture video under warm

fluorescent lighting.

[Mercury Lamp]

Select this option to capture video under mercury

lamps.

[Sodium Lamp]

Select this option to capture video under orange

sodium lamps.

[Halogen Lamp]

Select this option to capture video under halogen

lamps or incandescent bulbs.

Note

• See “Subjects Difficult to Focus On” (p. 38).

• Focus ranges (rough guide) are shown in the following table

according to the settings of [Day/Night] (p. 53), etc.

* When using an infrared lamp, the camera may be out of focus.

Important

• The initial camera settings (1) to (6) define the defaults that

apply when the camera is started. Setting changes will be

reflected only after the camera is reconnected or rebooted.

Specify the settings used in the actual operating environment

from the Admin Viewer (p. 137).

• If the subject is a traffic signal or electronic scoreboard, etc.,

the captured image may flicker.

In this case, try changing the [AE Mode] setting to [Auto

(Shutter-priority AE)] and selecting a shutter speed lower

than 1/100 to see if the problem improves.

• Setting a slow shutter speed may make it impossible for

intelligent functions to work correctly. Select a shutter speed

that suits the capture conditions and purpose.

•

In conditions where an outdoor scene is captured

from an indoor location through a glass window, the camera

may focus on the glass surface if there is dust or water there.

Install the camera at the shortest possible distance from the

glass surface.

Focus

Mode

Dome

Setting

Day/Night Setting

Day Mode Night Mode

Wide end Tele end Wide end Tele end

Auto

Do not use

0.3 m (12 in)

– infinity

1.0 m (3.3 ft)

– infinity

1.0 m (3.3 ft)

– infinity

1.5 m (4.9 ft)

– infinity

Use 2.0 m (6.6 ft) – infinity

1.0 m (3.3 ft)

– infinity

2.2 m (7.2 ft)

– infinity

Fixed at

infinity

Do not use/

Use

Focused at infinity

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-H610VE Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-H610VE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info